2007 Case 580M Equipment Units

$35,900.00
Tag #: 89-06 
VIN #: N7C424904  
Loader / Back Hoe: Case 580M 4x4 backhoe

Reman Engine installed at 3,777 Hours

Loader Dimensions
A. TRANSPORT LENGTH 23.2 ft in
B. TRANSPORT WIDTH 7.2 ft in
C. TRANSPORT HEIGHT 11.3 ft in
D. WHEELBASE 7 ft in
E. GROUND CLEARANCE 1.2 ft in
F. HEIGHT TO TOP OF CAB 8.9 ft in
G. CLEARANCE AT MAX DUMP HEIGHT 8.7 ft in
H. REACH AT MAX DUMP HEIGHT 28.2 ft in
I. DIG DEPTH 7.8 in
J. LOAD HEIGHT - STD 11.2 ft in
K. REACH FROM SWIVEL - STD 17.8 ft in
L. DIG DEPTH - STD 14.3 ft in
M. REACH AT LOAD HEIGHT - STD 8.8 ft in


Engine
MAKE Iveco 4.5L
MODEL Family III 445/M2, Tier II certified
GROSS POWER 80 hp
NET POWER 76 hp
DISPLACEMENT 272 cu in 4.5 L
POWER MEASURED @ 2200 rpm
TORQUE MEASURED @ 1400 rpm
NET TORQUE RISE 23 %
NUMBER OF CYLINDERS 4
NET MAX TORQUE 231 lb ft
ASPIRATION Natural

Operational
OPERATING WEIGHT 2WD 13359 lb
MAX WEIGHT 16510 lb
FUEL CAPACITY 31.4 gal
HYDRAULIC SYSTEM FLUID CAPACITY 28 gal
OIL SYSTEM FLUID CAPACITY 3.6 gal
COOLING SYSTEM FLUID CAPACITY 4.5 gal
TRANSMISSION FLUID CAPACITY 5.5 gal
FRONT AXLE FLUID CAPACITY 1.5 gal
REAR AXLE FLUID CAPACITY 3.8 gal
TURNING RADIUS 11 ft in
TIRE SIZE FRONT - 2WD / 4WD 11Lx16.1/12x16.5
REAR TIRES SIZE 2WD/4WD 17.5Lx24/19.5Lx24
OPERATING VOLTAGE 12 V
ALTERNATOR SUPPLIED AMPERAGE 90 amps

Transmission
TYPE 4-speed synchromesh with hydraulically actuated clutches
NUMBER OF FORWARD GEARS 4
NUMBER OF REVERSE GEARS 4
MAX SPEED - FORWARD 24.5 mph
MAX SPEED REVERSE 29.6 mph

Backhoe
DIG DEPTH - STD 14.3 ft in
DIG DEPTH - EXT 18.3 ft in 5560 mm
REACH FROM SWIVEL - STD 17.8 ft in
REACH FROM SWIVEL - EXT 21.8 ft in
BUCKET DIG FORCE - STD 11212 lb
BUCKET DIG FORCE - EXT 11212 lb
LOAD AT MAX LIFT - STD 1950 lb
LOAD AT MAX LIFT - EXT 810 lb
LOAD HEIGHT - STD 11.2 ft in
LOAD HEIGHT - EXT 13.3 ft in
REACH AT LOAD HEIGHT - STD 8.8 ft in
REACH AT LOAD HEIGHT - EXT 11.5 ft in

Loader
BUCKET CAPACITY 0.87 yd3
BUCKET WIDTH 82 in
BUCKET BREAKOUT FORCE 9164 lb
LIFT CAPACITY AT FULL HEIGHT 6182 lb
CLEARANCE AT MAX DUMP HEIGHT 8.7 ft in
REACH AT MAX DUMP HEIGHT 28.2 ft in
DIG DEPTH 7.8 in

Hydraulic
PUMP TYPE gear-type, transmission driven
PUMP FLOW CAPACITY 28.5 gal/min
RELIEF VALVE PRESSURE 3050 psi




Engine Yanmar
Horsepower 29
Hours 1470

Vander Haags Inc SP

3809 4th Ave W
Spencer, IA 51301

USA
(877)238-5030
Vendor must be contacted to purchase part.
Vander Haags Inc SP Logo Vander Haags Inc SP
Vander Haag's is your heavy trucks, trailers, parts, equipment and service headquarters. We have six great locations across the Midwest. We carry everything from new or used to rebuilt parts in the heavy truck & equipment industry. We stock power steering gears, engines, carriers, cabs, transmissions, fenders, bumpers, doors, grilles, hoods and much more!
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Other Suppliers Near This Location

JACKSON MN
33 Miles
Jackson MN
34 Miles
Sioux Falls SD
85 Miles
Sioux Falls SD
85 Miles
NE
123 Miles
Clarksville Iowa
128 Miles
DES MOINES IA
130 Miles
Des Moines IA
130 Miles