2020 ASV RT40AWC Equipment Units

Skid Steer: Price is for base unit only - NO Attachments

OPERATING SPECIFICATIONS
Loader arms: Radial
Operating weight: 4,175 lb / 1,894 kg
Shipping weight: 3,767 lbs / 1,709 kg
Ground pressure @ operating weight: 3.5 psi / 24.1 kPa
Rated operating capacity (35% tipping load): 931 lbs / 422 kg
Tipping load: 2,660 lbs / 1,206 kg
Travel speed, max.: 7.1 mph / 11.4 kph

ENGINE
Type: Diesel, 3-cylinder, Turbocharged
Model: Kubota D1803-CR-T
Displacement: 111.4 in3 / 1.82 L
Gross power rating @ 2800 rpm: 37.5 hp / 27.9 kW
Torque, peak: 84.5 ft-lb | 115.8 Nm
Cooling system: Engine-driven fan and coolant/anti-freeze-filled radiator
Intake air cleaner: Dual stage
Emission controls: Meets all US EPA Tier 4 final standards

UNDERCARRIAGE
Track type: General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Single row of track drive lugs molded in. Turf track with smooth tread available as an option.
Track width: 11 in / 279 mm
Length of track on ground: 55 in / 1,397 mm
Ground contact area: 1,210 in2 / .78 m2
Drive system: Two hydrostatic direct drive sprockets controlled by a single joystick.
Track drive sprockets: Elevated with low friction, replaceable sprocket rollers.
Undercarriage suspension: 2 independent torsion axles per undercarriage.
Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings.
Roller wheel diameter: 10 in / 254 mm

AUX. HYDRAULIC SYSTEM
Pump capacity: 13.3 gpm / 50.35 lpm
System pressure: 3,000 psi / 20,684 kPa
Controls: Intermittent via joystick button or continuous via console switch, mode selectable via dash-mounted switch.
Couplers: Push-to-connect quick couplers mounted on loader arm. Pressure relief valve mounted to coupler block.
Cooling system: High efficiency oil cooler beside engine radiator, not stacked.
Standard features: Attachment control kit, Manual quick-attach

ELECTRICAL SYSTEM
Nominal charge: 12 V
Battery: 525 CCA
Charging system: 60-amp alternator
Outlets: 2 -1 2 V ports inside operator station.
Wiring: Pre-wired for all factory-available accessories.
Standard features: Engine block heater

OPERATOR STATION
Seat: Adjustable contour vinyl suspension seat with built-in operator presence switch, lap bar and 2-inch | 51 mm wide seat belt.
Loader control: Right-hand pilot hydraulic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic.
Drive control: Left-hand pilot hydraulic joystick controls machine speed and direction.
Engine speed: Hand-operated rotary throttle.
Parking brake: Actuated by dash-mounted switch.
Multi-Functional Display/Indicator: Engine oil pressure, Hydraulic oil temperature, Engine coolant temperature, Battery voltage, Hourmeter, Fuel level, Tachometer, Tripmeter.
ROPS: ISO 3471 2008-08-15, CAL OSHA 1596, 1999 subsect. (g) (9)
FOPS: ISO 3449: 2005-09
Operator restraint anchorage: ISO 6683:2005-01-15
Illumination: 2 - Fixed forward-facing halogen lights, 1 - Adjustable rear-facing halogen light, 1 - Interior light
Convenience: 2 - 12 V power ports
Standard features: Horn, backup alarm, rear window