SEARCH - Equipment (Whole Vehicle)

PART
MANUFACTURER
MODEL
ENTER A ZIP OR POSTAL CODE TO SORT BY DISTANCE
Your search has 13 matches. Now showing results 1 through 13.

Equipment (Whole Vehicle) Keywords: loader

FEATURED ITEMS

Equipment (Whole Vehicle) ASV VT100 Vander Haags Inc Sp
VIN #: ASVVT100JRDS00165

Skid Steer VT-100 SPECS OPERATIONS Loader Arms Vertical Operating Weight10345 lbs Rated Operating Capacity @ 35%3500 lbs Ground Pressure4.0 psi Engine Power103.5 hp Loader ArmsVertical Operating Weight (Open Cab)10345 lbs Operating Weight (Closed Cab)10835 lbs Ground Pressure at Operating Weight4.0 psi Rated Operating Capacity (35% Of Tipping Load)3500 lbs Tipping Load10000 lbs Travel Speed, Maximum9.3 mph ENGINE Type Diesel 4-cylinder, Intercooled Turbo Model Yanmar 4TNV94FHT Cooling System Hydraulically-driven fan and anti-freeze filled radiator cooling system Intake Air Cleaner Three-stage Emission Controls Meets all U.S. EPA Tier 4 final standards Engine Power103.5 hp Displacement3.1 L Gross Horsepower103.5 hp Torque Peak291 ft-lb DRIVE TRAIN Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads Drive System Two hydrostatic direct drive sprockets controlled by a single joystick Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage Suspension Two independent torsion axles per undercarriage Roller Wheels 24 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings Track Width18 in. Length of Track on the Ground71 in. Ground Contact Area2556 in.2 Roller Wheel Diameter Front & rear wheels15 in Roller Wheel Diameter Middle Wheel10 in AUXILIARY HYDRAULIC Controls Intermittent via joystick button or continuous via console switch. High-flow is adjustable. Couplers Flat Faced Couplers: 1/2 in. low flow, 3/4 in. high flow Cooling System High efficiency side-by-side radiator and oil cooler Pump Capacity Low23 gpm Pump Capacity High41 gpm System Pressure Max Low3481 psi System Pressure Max High3989 psi ELECTRICAL SYSTEM Standard Features Block heater Outlets 1 -12 V port inside operator station Wiring Upgradeable wiring harness Charging System 80 amp alternator Nominal Charge12 V Battery950 CCA OPERATOR STATION Seat Mechanical suspension seat with 2 in. seat belt Controls Electronic joystick controls with ISO or H pattern settings, adjustable operator profiles and speeds Cab ROPS or All Weather Cab with curved glass door Engine Speed Standard foot pedal with hand dial option FOPS ISO 3449 Level 1 (level 2 optional), emergency roof exit ROPS ROPS: ISO 3471, Restraint-ISO 6683, SAE J2292, Cal OSHA 1596 Illumination 2 - Forward-facing LED lights, 2 - Rear-facing LED lights Standard Features ROPS with mechanical suspension seat, adjustable pilot controls, 7-in. deluxe color display, foot throttle, cupholder, phone holder, roof panel, roof insulation, rear window, two speed, high flow, Hyd Q/A, attachment control kit, Dual Direction Bucket Positioning 7-IN. Color Machine Display Fuel, tachometer, engine temp, hour meter, battery, trip meter, hydraulic temperature, water temperature, multiple languages SERVICE CAPACITY Fuel Tank34 gal DEF Capacity5 gal

ALL RESULTS

Equipment (Whole Vehicle) ASV VT100 Vander Haags Inc Sp
VIN #: ASVVT100JRDS00165

Skid Steer VT-100 SPECS OPERATIONS Loader Arms Vertical Operating Weight10345 lbs Rated Operating Capacity @ 35%3500 lbs Ground Pressure4.0 psi Engine Power103.5 hp Loader ArmsVertical Operating Weight (Open Cab)10345 lbs Operating Weight (Closed Cab)10835 lbs Ground Pressure at Operating Weight4.0 psi Rated Operating Capacity (35% Of Tipping Load)3500 lbs Tipping Load10000 lbs Travel Speed, Maximum9.3 mph ENGINE Type Diesel 4-cylinder, Intercooled Turbo Model Yanmar 4TNV94FHT Cooling System Hydraulically-driven fan and anti-freeze filled radiator cooling system Intake Air Cleaner Three-stage Emission Controls Meets all U.S. EPA Tier 4 final standards Engine Power103.5 hp Displacement3.1 L Gross Horsepower103.5 hp Torque Peak291 ft-lb DRIVE TRAIN Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads Drive System Two hydrostatic direct drive sprockets controlled by a single joystick Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage Suspension Two independent torsion axles per undercarriage Roller Wheels 24 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings Track Width18 in. Length of Track on the Ground71 in. Ground Contact Area2556 in.2 Roller Wheel Diameter Front & rear wheels15 in Roller Wheel Diameter Middle Wheel10 in AUXILIARY HYDRAULIC Controls Intermittent via joystick button or continuous via console switch. High-flow is adjustable. Couplers Flat Faced Couplers: 1/2 in. low flow, 3/4 in. high flow Cooling System High efficiency side-by-side radiator and oil cooler Pump Capacity Low23 gpm Pump Capacity High41 gpm System Pressure Max Low3481 psi System Pressure Max High3989 psi ELECTRICAL SYSTEM Standard Features Block heater Outlets 1 -12 V port inside operator station Wiring Upgradeable wiring harness Charging System 80 amp alternator Nominal Charge12 V Battery950 CCA OPERATOR STATION Seat Mechanical suspension seat with 2 in. seat belt Controls Electronic joystick controls with ISO or H pattern settings, adjustable operator profiles and speeds Cab ROPS or All Weather Cab with curved glass door Engine Speed Standard foot pedal with hand dial option FOPS ISO 3449 Level 1 (level 2 optional), emergency roof exit ROPS ROPS: ISO 3471, Restraint-ISO 6683, SAE J2292, Cal OSHA 1596 Illumination 2 - Forward-facing LED lights, 2 - Rear-facing LED lights Standard Features ROPS with mechanical suspension seat, adjustable pilot controls, 7-in. deluxe color display, foot throttle, cupholder, phone holder, roof panel, roof insulation, rear window, two speed, high flow, Hyd Q/A, attachment control kit, Dual Direction Bucket Positioning 7-IN. Color Machine Display Fuel, tachometer, engine temp, hour meter, battery, trip meter, hydraulic temperature, water temperature, multiple languages SERVICE CAPACITY Fuel Tank34 gal DEF Capacity5 gal
Equipment (Whole Vehicle) ASV RT135 FORESTRY Vander Haags Inc Sp
VIN #: ASVRT135LRDF00936

Skid Steer RT-135 FORESTRY OPERATIONS Loader Arms Radial Operating Weight12990 lbs Rated Operating Capacity @ 35%4150 lbs Rated Operating Capacity @ 50%5929 lbs Ground Pressure4.6 psi Engine Power132 hp Tipping Load11858 lbs Travel Speed, Maximum - 1st Speed6 mph Travel Speed, Maximum - 2nd Speed10 mph ENGINE Type Diesel 4-cylinder, turbo charged Model Cummins QSF3.8 Cooling System Temperature-controlled, variable speed and operator time-selectable, hydraulically-driven, auto-reversing fan and coolant/anti-freeze-filled radiator Intake Air Cleaner Three-stage Emission Controls Meets all U.S. EPA Tier 4 final standards Standard Feature Auto Idle Engine Power132 hp Gross Power Rating132 hp Torque Peak360 ft-lb DRIVE TRAIN Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Drive System Two hydrostatic direct drive sprockets controlled by a single joystick Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage suspension Two independent torsion axles per undercarriage Roller Wheels 24 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings Track Width20 in Length of Track on the Ground71 in Ground Contact Area2840 in2 Roller Wheel Diameter Front & rear wheels15 in Roller Wheel Diameter Middle Wheel10 in AUXILIARY HYDRAULIC Controls Intermittent via joystick button or continuous via console switch. High-flow is adjustable and loader/auxiliary sharing is adjustable via machine display Couplers Push-to-connect quick couplers mounted on loader arms. Pressure relief valve on coupler block Cooling System High efficiency side-by-side radiator and oil cooler Pump Capacity Low20 gpm Pump Capacity High50 gpm System Pressure Max Low3300 psi System Pressure Max High4060 psi ELECTRICAL SYSTEM Standard Features Attachment control kit, block heater Wiring Pre-wired for all factory-available accessories Outlets 1 - 12 V inside operator station Charging System 120 Amp Nominal Charge12 V Battery950 CCA OPERATOR STATION Seat Adjustable air ride contour vinyl seat with built-in operator presence switch, lap bar and 2 in. ( 51 mm ) wide seat belt, operator manual pouch Loader Control Right-hand electronic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic. Loader speed is adjustable and selectable from ISO or H control pattern Drive Control : Left-hand electronic joystick controls machine speed and direction. Track speed is adjustable, includes a Creep Mode and is selectable from ISO or H control pattern Engine Speed Hand-operated throttle and foot throttle 7-Inch Color Machine Display Engine RPM, engine oil pressure, hydraulic oil high temperature, engine coolant temperature, battery voltage, hour meter, fuel level, trip meter, engine diagnostics, system monitoring, fault logging, integrated rear view camera, password protection with user profiles, job clock, maintenance schedules, Def level, Adjustable controls, Adjustable hydraulic flows, winch (optional) control. ROPS ISO 8082-Forestry FOPS ISO 8083-Forestry OPS ISO 8084-Forestry, BC WCB G603 - Window guards for forestry, BC WCB G604 - Light duty screen guards for off highway, BC WCB G608 - Heavy duty roof structure, ISO 6683 - Seat belt anchors, CAL OSHA 1596 - Seat belt, SAE J2292 - Shoulder restraint (when equipped with 3 point options), ISO 11839 - Forestry thrown object guard Illumination 2 - Adjustable forward-facing LED lights, 2 - Adjustable rear-facing LED lights, 1 - Interior light, 2 - LED side lights Convenience 12 V power port Standard Features Horn, backup alarm, cup holder, phone holder, behind seat storage, rear view mirror, lapbar, roof escape hatch, roof panel & rear cab windows. Adjustable joystick & arm rest positions, adjustable directional & air flow HVAC vents, radio with bluetooth & USB, frameless front door, attachment control kit, wiper/washer, easy-off door
Equipment (Whole Vehicle) ASV RT75 AWC Vander Haags Inc Sp
VIN #: ASVRT075LRDS05353

Skid Steer Price is for base unit only, BUCKET NOT INCLUDED OPERATING SPECIFICATIONS Loader arms Radial Operating weight 9,180 lbs | 4164 kg Shipping weight 8,626 lbs | 3916 kg Ground pressure @ operating weight std. track - 3.6 psi | 24.8 kPa opt. track - 3.2 psi | 22 kPa Rated operating capacity, 35% of tipping load 2,650 lbs | 1203 kg Operating capacity, 50% of tipping load 3,786 lbs | 1719 kg Tipping load 7,571 lbs | 3437 kg Travel speed, maximum - 1st speed 6.3 mph | 10.1 kph Travel speed, maximum - 2nd Speed 9.3 mph | 15 kph ENGINE Type Diesel, 4-cylinder, intercooled, turbocharged Model Cummins QSF2.8 Displacement 171 in3 | 2.8 L Gross power rating @ 2800 rpm 74 hp | 55 kW Torque, peak 221 ft-lb | 300 Nm Cooling system Temperature-controlled variable speed hydraulically-driven fan and coolant/anti-freeze-filled radiator Intake air cleaner Dual stage Emission controls Meets all U.S. EPA Tier 4 final standards UNDERCARRIAGE Track type: General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Track width Standard - 18 in. | 475 mm Optional Wide Track - 20 in. | 508 mm Length of track on ground 71 in | 1803 mm Ground contact area 2,556 in2 | 1.65 m2 Drive system Two hydrostatic direct drive sprockets controlled by a single joystick Track drive sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage suspension Two independent torsion axles per undercarriage Roller wheels 24 high-density polyurethane and rubber wheels per track Wheels include sealed bearings Roller wheel diameter: Front and rear wheels Middle wheels 15 in. | 381 mm 10 in. | 254 mm RT-75 AUX. HYDRAULIC SYSTEM Pump capacity: Low - variable from 0-22.6 gpm (85.5 lpm). High - 35.7 gpm (135 lpm) System pressure, max. 3,300 psi | 22 750 kPa Controls Intermittent via joystick button or continuous via console switch, mode selectable via dash-mounted switch Couplers Push-to-connect quick couplers mounted on loader arms Pressure relief valve mounted to coupler block Cooling system High efficiency side-by-side radiator and oil cooler ELECTRICAL SYSTEM Nominal charge 12 V Battery 950 CCA Charging system 120 amp alternator Outlets 1-12 V port inside operator station Wiring Pre-wired for all factory-available accessories OPERATOR STATION Seat: Adjustable contour vinyl with built-in operator presence switch, lap bar and 2 in | 51 mm wide seat belt Loader control: Right-hand pilot hydraulic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic Drive control: Left-hand pilot hydraulic joystick controls machine speed and direction Engine speed Hand-operated throttle Machine display Engine RPM Engine coolant temperature Engine oil pressure Hydraulic oil temperature Battery voltage Hour meter Fuel level ROPS Meets SAE J1040 MAY94, ISO 3471 FOPS Meets SAE J1043 SEPT87, ISO 3449 Illumination 2 - Fixed forward-facing halogen lights 2 - Adjustable rear-facing halogen lights 1 - Interior light Convenience 12 V power port Horn Backup alarm
Equipment (Whole Vehicle) ASV RT75 AWC Vander Haags Inc Sp
VIN #: ASVRT075HPDS05027

Skid Steer Price is for base unit only, BUCKET NOT INCLUDED OPERATING SPECIFICATIONS Loader arms Radial Operating weight 9,180 lbs | 4164 kg Shipping weight 8,626 lbs | 3916 kg Ground pressure @ operating weight std. track - 3.6 psi | 24.8 kPa opt. track - 3.2 psi | 22 kPa Rated operating capacity, 35% of tipping load 2,650 lbs | 1203 kg Operating capacity, 50% of tipping load 3,786 lbs | 1719 kg Tipping load 7,571 lbs | 3437 kg Travel speed, maximum - 1st speed 6.3 mph | 10.1 kph Travel speed, maximum - 2nd Speed 9.3 mph | 15 kph ENGINE Type Diesel, 4-cylinder, intercooled, turbocharged Model Cummins QSF2.8 Displacement 171 in3 | 2.8 L Gross power rating @ 2800 rpm 74 hp | 55 kW Torque, peak 221 ft-lb | 300 Nm Cooling system Temperature-controlled variable speed hydraulically-driven fan and coolant/anti-freeze-filled radiator Intake air cleaner Dual stage Emission controls Meets all U.S. EPA Tier 4 final standards UNDERCARRIAGE Track type: General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Track width Standard - 18 in. | 475 mm Optional Wide Track - 20 in. | 508 mm Length of track on ground 71 in | 1803 mm Ground contact area 2,556 in2 | 1.65 m2 Drive system Two hydrostatic direct drive sprockets controlled by a single joystick Track drive sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage suspension Two independent torsion axles per undercarriage Roller wheels 24 high-density polyurethane and rubber wheels per track Wheels include sealed bearings Roller wheel diameter: Front and rear wheels Middle wheels 15 in. | 381 mm 10 in. | 254 mm RT-75 AUX. HYDRAULIC SYSTEM Pump capacity: Low - variable from 0-22.6 gpm (85.5 lpm). High - 35.7 gpm (135 lpm) System pressure, max. 3,300 psi | 22 750 kPa Controls Intermittent via joystick button or continuous via console switch, mode selectable via dash-mounted switch Couplers Push-to-connect quick couplers mounted on loader arms Pressure relief valve mounted to coupler block Cooling system High efficiency side-by-side radiator and oil cooler ELECTRICAL SYSTEM Nominal charge 12 V Battery 950 CCA Charging system 120 amp alternator Outlets 1-12 V port inside operator station Wiring Pre-wired for all factory-available accessories OPERATOR STATION Seat: Adjustable contour vinyl with built-in operator presence switch, lap bar and 2 in | 51 mm wide seat belt Loader control: Right-hand pilot hydraulic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic Drive control: Left-hand pilot hydraulic joystick controls machine speed and direction Engine speed Hand-operated throttle Machine display Engine RPM Engine coolant temperature Engine oil pressure Hydraulic oil temperature Battery voltage Hour meter Fuel level ROPS Meets SAE J1040 MAY94, ISO 3471 FOPS Meets SAE J1043 SEPT87, ISO 3449 Illumination 2 - Fixed forward-facing halogen lights 2 - Adjustable rear-facing halogen lights 1 - Interior light Convenience 12 V power port Horn Backup alarm
Equipment (Whole Vehicle) ASV RT135 FORESTRY Vander Haags Inc Sp
VIN #: ASVRT135EPDF00855

Skid Steer RT-135 Forestry Specs OPERATIONS Loader Arms Radial Operating Weight12990 lbs Rated Operating Capacity @ 35%4150 lbs Rated Operating Capacity @ 50%5929 lbs Ground Pressure4.6 psi Engine Power132 hp Tipping Load11858 lbs Travel Speed, Maximum - 1st Speed6 mph Travel Speed, Maximum - 2nd Speed10 mph ENGINE Type Diesel 4-cylinder, turbo charged Model Cummins QSF3.8 Cooling System Temperature-controlled, variable speed and operator time-selectable, hydraulically-driven, auto-reversing fan and coolant/anti-freeze-filled radiator Intake Air Cleaner Three-stage Emission Controls Meets all U.S. EPA Tier 4 final standards Standard Feature Auto Idle Engine Power132 hp Gross Power Rating132 hp Torque Peak360 ft-lb DRIVE TRAIN Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Drive System Two hydrostatic direct drive sprockets controlled by a single joystick Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage suspension Two independent torsion axles per undercarriage Roller Wheels 24 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings Track Width20 in Length of Track on the Ground71 in Ground Contact Area2840 in2 Roller Wheel Diameter Front & rear wheels15 in Roller Wheel Diameter Middle Wheel10 in AUXILIARY HYDRAULIC Controls Intermittent via joystick button or continuous via console switch. High-flow is adjustable and loader/auxiliary sharing is adjustable via machine display Couplers Push-to-connect quick couplers mounted on loader arms. Pressure relief valve on coupler block Cooling System High efficiency side-by-side radiator and oil cooler Pump Capacity Low20 gpm Pump Capacity High50 gpm System Pressure Max Low3300 psi System Pressure Max High4060 psi ELECTRICAL SYSTEM Standard Features Attachment control kit, block heater Wiring Pre-wired for all factory-available accessories Outlets 1 - 12 V inside operator station Charging System 120 Amp Nominal Charge12 V Battery950 CCA OPERATOR STATION Seat Adjustable air ride contour vinyl seat with built-in operator presence switch, lap bar and 2 in. ( 51 mm ) wide seat belt, operator manual pouch Loader Control Right-hand electronic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic. Loader speed is adjustable and selectable from ISO or H control pattern Drive Control : Left-hand electronic joystick controls machine speed and direction. Track speed is adjustable, includes a Creep Mode and is selectable from ISO or H control pattern Engine Speed Hand-operated throttle and foot throttle 7-Inch Color Machine Display Engine RPM, engine oil pressure, hydraulic oil high temperature, engine coolant temperature, battery voltage, hour meter, fuel level, trip meter, engine diagnostics, system monitoring, fault logging, integrated rear view camera, password protection with user profiles, job clock, maintenance schedules, Def level, Adjustable controls, Adjustable hydraulic flows, winch (optional) control. ROPS ISO 8082-Forestry FOPS ISO 8083-Forestry OPS ISO 8084-Forestry, BC WCB G603 - Window guards for forestry, BC WCB G604 - Light duty screen guards for off highway, BC WCB G608 - Heavy duty roof structure, ISO 6683 - Seat belt anchors, CAL OSHA 1596 - Seat belt, SAE J2292 - Shoulder restraint (when equipped with 3 point options), ISO 11839 - Forestry thrown object guard Illumination 2 - Adjustable forward-facing LED lights, 2 - Adjustable rear-facing LED lights, 1 - Interior light, 2 - LED side lights Convenience 12 V power port Standard Features Horn, backup alarm, cup holder, phone holder, behind seat storage, rear view mirror, lapbar, roof escape hatch, roof panel & rear cab windows. Adjustable joystick & arm rest positions, adjustable directional & air flow HVAC vents, radio with bluetooth & USB, frameless front door, attachment control kit, wiper/washer, easy-off door SERVICE CAPACITY Fuel Tank52 gal Hydraulic Tank22 gal Engine Coolant5.5 gal Engine Oil (Including Filter)12 quarts
Equipment (Whole Vehicle) ASV RT40AWC Vander Haags Inc Sp
VIN #: ASVRT040JPDS07877

Skid Steer RT-40 OPERATIONS Loader Arms Radial Operating Weight4005 lbs Rated Operating Capacity @ 35%931 lbs Rated Operating Capacity @ 50%1330 lbs Ground Pressure3.3 psi Engine Power38.2 hp Tipping Load2660 lbs Max. Travel Speed7.1 mph ENGINE Type Diesel, 3-cylinder, turbo charged Model YANMAR 3TNV86CT Engine Power38.2 hp Displacement95.7 in3 Gross Horsepower38.2 hp Torque Peak93.6 ft-lb DRIVE TRAIN Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Single row of track drive lugs molded in. Turf track with smooth tread available as an option Drive System Two hydrostatic direct drive sprockets controlled by a single joystick Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage suspension 2 independent torsion axles per undercarriage Roller Wheels 12 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings Track Width11 in Length of Track on the Ground55 in Ground Contact area1210 in2 Roller Wheel Diameter10 in AUXILIARY HYDRAULIC Controls Variable flow via joystick button or continuous via console switch, mode selectable via dash-mounted switch Couplers Push to connect quick couplers mounted on manifold block. Pressure relief valve on block Cooling System High efficiency oil cooler beside engine radiator, not stacked Standard Features Manual quick-attach Pump Capacity13.3 gpm System Pressure, Max3000 psi ELECTRICAL SYSTEM Standard Features Engine block heater Wiring Pre-wired for all factory-available accessories Outlets 1-12 V port inside operator station Charging System 80 Amp Alternator Nominal Charge12V Battery590 CCA OPERATOR STATION Seat Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2 in. ( 51 mm ) wide seat belt Loader Control Right-hand pilot hydraulic joystick controls loader lift/tilt, with intermittent control of auxiliary hydraulics Drive Control Left-hand pilot hydraulic joystick controls machine speed and direction Engine speed Hand-operated rotary throttle Parking Brake Actuated by dash-mounted switch Multi-Functional Color 4.3 Inch Display/Indicator Engine RPM, Engine Coolant Temperature, Engine Oil Pressure, Hydraulic Oil Temperature, Battery Voltage, Hour Meter, Fuel Level, Trip Meter, Engine Diagnostics, System Monitoring, Fault Logging and More ROPS Meets ISO 3471 FOPS Meets ISO 3449 Operator Restraint Anchorage Meets ISO 6683, CAL OSHA 1596 Illumination 2 - Fixed forward-facing LED lights, 1 - Adjustable rear-facing LED light, 1 - Interior light, 2 - Red LED tail lights Convenience 1 - 12 V power ports Standard Features Horn, backup alarm, rear window
Equipment (Whole Vehicle) Case 580M Vander Haags Inc Sp
Engine: Yanmar
Horsepower: 29
Hours: 1470
VIN #: N7C424904

Loader / Back Hoe Case 580M backhoe Reman Engine installed at 3,777 Hours Loader Dimensions A. TRANSPORT LENGTH 23.2 ft in B. TRANSPORT WIDTH 7.2 ft in C. TRANSPORT HEIGHT 11.3 ft in D. WHEELBASE 7 ft in E. GROUND CLEARANCE 1.2 ft in F. HEIGHT TO TOP OF CAB 8.9 ft in G. CLEARANCE AT MAX DUMP HEIGHT 8.7 ft in H. REACH AT MAX DUMP HEIGHT 28.2 ft in I. DIG DEPTH 7.8 in J. LOAD HEIGHT - STD 11.2 ft in K. REACH FROM SWIVEL - STD 17.8 ft in L. DIG DEPTH - STD 14.3 ft in M. REACH AT LOAD HEIGHT - STD 8.8 ft in Engine MAKE Iveco 4.5L MODEL Family III 445/M2, Tier II certified GROSS POWER 80 hp NET POWER 76 hp DISPLACEMENT 272 cu in 4.5 L POWER MEASURED @ 2200 rpm TORQUE MEASURED @ 1400 rpm NET TORQUE RISE 23 % NUMBER OF CYLINDERS 4 NET MAX TORQUE 231 lb ft ASPIRATION Natural Operational OPERATING WEIGHT 2WD 13359 lb MAX WEIGHT 16510 lb FUEL CAPACITY 31.4 gal HYDRAULIC SYSTEM FLUID CAPACITY 28 gal OIL SYSTEM FLUID CAPACITY 3.6 gal COOLING SYSTEM FLUID CAPACITY 4.5 gal TRANSMISSION FLUID CAPACITY 5.5 gal FRONT AXLE FLUID CAPACITY 1.5 gal REAR AXLE FLUID CAPACITY 3.8 gal TURNING RADIUS 11 ft in TIRE SIZE FRONT - 2WD / 4WD 11Lx16.1/12x16.5 REAR TIRES SIZE 2WD/4WD 17.5Lx24/19.5Lx24 OPERATING VOLTAGE 12 V ALTERNATOR SUPPLIED AMPERAGE 90 amps Transmission TYPE 4-speed synchromesh with hydraulically actuated clutches NUMBER OF FORWARD GEARS 4 NUMBER OF REVERSE GEARS 4 MAX SPEED - FORWARD 24.5 mph MAX SPEED REVERSE 29.6 mph Backhoe DIG DEPTH - STD 14.3 ft in DIG DEPTH - EXT 18.3 ft in 5560 mm REACH FROM SWIVEL - STD 17.8 ft in REACH FROM SWIVEL - EXT 21.8 ft in BUCKET DIG FORCE - STD 11212 lb BUCKET DIG FORCE - EXT 11212 lb LOAD AT MAX LIFT - STD 1950 lb LOAD AT MAX LIFT - EXT 810 lb LOAD HEIGHT - STD 11.2 ft in LOAD HEIGHT - EXT 13.3 ft in REACH AT LOAD HEIGHT - STD 8.8 ft in REACH AT LOAD HEIGHT - EXT 11.5 ft in Loader BUCKET CAPACITY 0.87 yd3 BUCKET WIDTH 82 in BUCKET BREAKOUT FORCE 9164 lb LIFT CAPACITY AT FULL HEIGHT 6182 lb CLEARANCE AT MAX DUMP HEIGHT 8.7 ft in REACH AT MAX DUMP HEIGHT 28.2 ft in DIG DEPTH 7.8 in Hydraulic PUMP TYPE gear-type, transmission driven PUMP FLOW CAPACITY 28.5 gal/min RELIEF VALVE PRESSURE 3050 psi
Equipment (Whole Vehicle) Terex TL310 Vander Haags Inc Sp
VIN #: TZL03100133

Wheel Loader Operating weight 38,800 lbs , Tipping load, straight 29,100 lbs, Tipping load, articulated 25,350 lbs, Operating load articulated 12,300 lbs, Fuel tank 63 gal, Fully hydraulic steering - High Lift Option Available Total length, bucket on ground 24' 11", Total width 8' 10", Total height (top of cab) 11' 2"
Equipment (Whole Vehicle) Bobcat T650 Vander Haags Inc Col
VIN #: ALJG25442

Compact Track Loader
Equipment (Whole Vehicle) ASV RT40AWC Vander Haags Inc Kc
VIN #: ASVRT040KPDS07876

Skid Steer RT-40 OPERATIONS Loader Arms Radial Operating Weight4005 lbs Rated Operating Capacity @ 35%931 lbs Rated Operating Capacity @ 50%1330 lbs Ground Pressure3.3 psi Engine Power38.2 hp Tipping Load2660 lbs Max. Travel Speed7.1 mph ENGINE Type Diesel, 3-cylinder, turbo charged Model YANMAR 3TNV86CT Engine Power38.2 hp Displacement95.7 in3 Gross Horsepower38.2 hp Torque Peak93.6 ft-lb DRIVE TRAIN Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Single row of track drive lugs molded in. Turf track with smooth tread available as an option Drive System Two hydrostatic direct drive sprockets controlled by a single joystick Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage suspension 2 independent torsion axles per undercarriage Roller Wheels 12 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings Track Width11 in Length of Track on the Ground55 in Ground Contact area1210 in2 Roller Wheel Diameter10 in AUXILIARY HYDRAULIC Controls Variable flow via joystick button or continuous via console switch, mode selectable via dash-mounted switch Couplers Push to connect quick couplers mounted on manifold block. Pressure relief valve on block Cooling System High efficiency oil cooler beside engine radiator, not stacked Standard Features Manual quick-attach Pump Capacity13.3 gpm System Pressure, Max3000 psi ELECTRICAL SYSTEM Standard Features Engine block heater Wiring Pre-wired for all factory-available accessories Outlets 1-12 V port inside operator station Charging System 80 Amp Alternator Nominal Charge12V Battery590 CCA OPERATOR STATION Seat Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2 in. ( 51 mm ) wide seat belt Loader Control Right-hand pilot hydraulic joystick controls loader lift/tilt, with intermittent control of auxiliary hydraulics Drive Control Left-hand pilot hydraulic joystick controls machine speed and direction Engine speed Hand-operated rotary throttle Parking Brake Actuated by dash-mounted switch Multi-Functional Color 4.3 Inch Display/Indicator Engine RPM, Engine Coolant Temperature, Engine Oil Pressure, Hydraulic Oil Temperature, Battery Voltage, Hour Meter, Fuel Level, Trip Meter, Engine Diagnostics, System Monitoring, Fault Logging and More ROPS Meets ISO 3471 FOPS Meets ISO 3449 Operator Restraint Anchorage Meets ISO 6683, CAL OSHA 1596 Illumination 2 - Fixed forward-facing LED lights, 1 - Adjustable rear-facing LED light, 1 - Interior light, 2 - Red LED tail lights Convenience 1 - 12 V power ports Standard Features Horn, backup alarm, rear window
Equipment (Whole Vehicle) John Deere 444H Bobby Johnson Equipment Co., Inc.
VIN #: DW444HX566102

Wheel Loaders JOHN DEERE 444H WHEEL LOADER
Part Info
(318)995-6341phone icon Request Info email icon
EnterpriseBobby Johnson Equipment Co., Inc. OIL CITY LA
VIN #: AXX01539

TRACTOR
VIN #: 1772

UTILITY

Your search has 13 matches. Now showing results 1 through 13.

Did you have trouble finding what you were looking for? Click here to request a part

If unable to find an item, you can send a request to all yards.


 


Dutchers Inc. Heavy Truck Recycler, New York 



Heavy Quip, Inc. dba Diesel Sales




Frontier Truck Parts engines ad







Berryhill Auctioneers




Construction Equipment