SEARCH

Steer axle assembly pulled from a 2020 Kenworth T3 series run for approximately 10K miles, non-wrecked. Axle is set up for 34" standard spread. Eaton model E-1202IL rated for 12,000lbs. Has dual draw key pin. Customer P/N B05-6035-0J1000000 , serial MY01949153 . Listing is for axle, complete hub to hub; other front clip components not included.

Cooling pack assembly pulled from a 2020 Kenworth T3 series run for approx 10K miles, non-wrecked. Includes radiator, charge air cooler, condenser, fan shroud, etc. Unit was originally paired to a PX9 engine. In great used condition. Paired with tag 7500. Fan shroud OEM P/N F56-1025-014 Potential part number compatibility (verify with dealer by VIN) - Radiator RF368001 , CAC RF367001 , A/C Condenser RF361001 $2350 for cool pack as pictured - original CAC retail $1955, condenser retail $400

Tank surge / radiator / coolant overflow tank pulled from a 2020 Kenworth T3 series run for ~10K miles. Tank is in good used condition. Measures 17.5" long weld-weld with a total length of about 19". Diameter is about 6" across, steel material. OEM P/N F86-1053 Rev A. Sold as pictured.

TAKEOUT Low mileage (believed to be less than 10,000 miles) automatic Allison 3500RDS transmission off of a non-wrecked 2020 Kenworth T3 series mid duty. Serial 6511633370 . Comes with 30-day money-back guarantee against major component failure.

Radiator core support crossmember with engine mount pulled from a 2020 Kenworth T3 series, non-wrecked. This truck was Cummins PX9 application. Support is in good used condition, shows general light signs of wear/use. Crossmember was paired with tag 5865. OEM P/N A24-6482 secondary stamped OEM P/N A24-6465M02

Cab mounting bracket pulled from a 2020 Kenworth T3 series run for ~10K miles, non-wrecked. Part is in good used condition, see pictures. OEM P/N A85-6237

Right side engine support motor mount pulled from a 2018 Kenworth T370 run for just ~6,500 miles, non-wrecked; motor mount includes pad both parts are in good used condition. OEM P/N A85-6063R V112

Left side engine support motor mount pulled from a 2018 Kenworth T370 run for just ~6,500 miles, non-wrecked; motor mount includes pad both parts are in good used condition. OEM P/N A85-6063 V109

12,000 lbs rated Rockwell dual draw pin steer axle with disc brakes. Coming off of a non-wrecked 2018 Kenworth T370 with only 6,867 miles. Excellent condition. Set up for standard 34" spread. Axle model number MFS12E122CNM9 , customer P/N B05-6043-0C41000000 , serial M0N03146349

Front engine mount pulled from a 2018 Kenworth T370 run for only 6,466 miles, non-wrecked. Mount was set up with a PX7 engine. Great used condition as pictured. OEM P/N P107-826 REV A

Floor mat pulled from a 2020 Kenworth mid duty truck run for approx 10K miles, non-wrecked. Mat has signs of wear / use, but is structurally in good condition with no major rips or tears. OEM P/N is believed to be S14-1214-000000000.

Plate-bearing , center-bearing midship bracket pulled from a 2018 Kenworth T370 run for only 6.867 miles, non-wrecked. Plate is in good used condition, see pictures. OEM P/N K257-223-20 REV E

Windshield wiper transmission / wiper motor pulled from a 2020 Kenworth T3 series run for approx 10K miles, non-wrecked. Part is in good used condition, see pictures. Measures 44" end to end. OEM P/N R23-6025 REV C

Front engine mount pulled from a 2018 Kenworth T370 run for only 6,867 miles, non-wrecked. Mount was set up with a PX7 engine. Good used condition as pictured. OEM P/N P107-826 REV A

Air conditioner evaporator housing / dash HVAC shell pulled from a 2020 Kenworth T3 series run for approx 10K miles non-wrecked. Part is in good used condition, see pictures. OEM P/N F31-1259 REV A

Single axle two-bag rear cutoff/clip with drum brakes pulled from a 2020 Kenworth T3 series run for approximately 10K miles, non-wrecked. 4.88 ratio. Axle model C2-5YD4KPB000000 , serial HN07719067

Front cab suspension pulled from a 2018 Kenworth T370 run for just 6,867 miles, non-wrecked. Bracket is in good used condition. OEM P/N R85-1167

Front cab suspension pulled from a 2018 Kenworth T370 run for just 6,466 miles, non-wrecked. Bracket is in good used condition. OEM P/N R85-1167

Passenger side mirror assembly pulled from a 2020 Kenworth T3 series run for ~10K miles, non-wrecked. OEM P/N R59-6123-22100000

Leaf spring pulled from a low mileage 2020 Kenworth T3 series, non-wrecked. Part is in good used condition, see pictures. Single leaf, standard 4in width. OEM P/N B81-6082-002 REV A

Driver side mirror assembly pulled from a 2020 Kenworth T3 series run for ~10K miles, non-wrecked. OEM P/N R59-6122-22110000

Front cab suspension / brace closure panel pulled from a 2011 Kenworth T370, non-wrecked. Bracket is in good used condition, see pictures. OEM P/N R85-1065

Roof headliner pulled from a 2020 Kenworth T3 series run for approx 10K miles, non-wrecked. Headliner is in good used condition, see pictures. OEM P/N S89-1513-300111001 REV B

Front suspension saddle / spring pad / U-bolt top plate OEM P/N B63-6008 pulled from a 2018 Kenworth T370 run for about 7K miles, non-wrecked. Part is in great used condition.

Plastic back window trim panel pulled from a 2020 PACCAR truck run for approx 10K miles, non-wrecked. Panel is in like-new condition, see pictures. OEM P/N S60-1610 REV B