SEARCH - Fender

Good, used passenger side fiberglass fender extension off of a 2013 Peterbilt 382 truck. The fender extension has been visually inspected and is in good condition. There is no visible damage seen on the fender extension. The inside of the fender extension has visible rust and corrosion. The casting number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Left hand fender extension pulled from a 2019 Kenworth T680 short hood, non-wrecked. Fender has general wear & some small cracking at bottom corner with sizeable crack along corner/edge as pictured, runnable as-is but will need repair. OEM P/N N35-6015

Minimizer PM 1600 TPO MIN1600 Grey Poly Full Radius Fender for single axle tractor or trailer with dual 16.5in. wheels. (Scratches on Fender due to being moved around) Fender is not sold as a set, but as an individual fender. Bracket Kit Mounting Hardware NOT included MIN1600 High Quality Fender * Made Of Poly * Grey * 41 Inch Length * 20 Inch Width * 14 Inch Height * Designed To Fit A Single Axle Tractor Or Trailer With Dual 16-1/2 Inch Wheels * Brackets Not Included * Made In USA * Sold Individually

Good, used passenger side fiberglass fender extension off of a 2013 Peterbilt 382 truck. The fender extension has been visually inspected and is in good condition. There is no visible damage seen on the fender extension. The inside of the fender extension has visible rust and corrosion. The casting number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

NEW 24X25.5" 430SS 14GA 100" SINGLE - BUY PACKAGE 2 SOLD INDIVIDUALLYSee Video

Good used driver side fender from a 2011 International ProStar Premium truck. Fender is structurally sound and has very little damage to it overall. There is a chip in the middle that can easily be patched up and I don't know where the metal bracket came from, but it will be attached and included with the fender. There is a little rubbing wear on the inside as well. See photos and feel free to call or email us with any questions. We can ship Anywhere! Thank you for looking.

Good used passenger side fiber glass fender extension off a 2007 Freightliner M2-106 truck, part number is not visible. This driver side fender is in good condition, it does have paint peeling off in some spots but bot bad at all. The plastic latch on the hood is in good shape, also the bolt holes are all in good shape.. See photos and give us a call if you have any questions. We can ship Anywhere!. Thank you.

Good used driver side fiber glass fender off a 2010 Freightliner M2-106 truck, part number is not visible. This driver side fender is in decent condition, it does have paint peeling off in some spots but bot bad at all. It has a built-In fuse box on the outside of the fender. The plastic latch on the hood is in good shape, also the bolt holes are all in good shape.. See photos and give us a call if you have any questions. We can ship Anywhere!. Thank you.

Good, used fender from a 1995 International 9200 truck. The fender has been visually inspected and is in good working condition. There is no visible damage to the fender. There is no cracks in the fender. The casting number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used passenger fender with mudflap from a 1995 International 9200 truck. The fender has been visually inspected and is in good working condition. there is a minor crack in the fender. The fender has minor corrosion. The fender does not have a visible casting number. Please see photos and give us a call or e-mail if you have any further questions. We can ship anywhere! Thank you!

Good, used driver side fender from a 2000 International 9400 truck. The fender has been visually inspected and is in good working condition. There is minor damage seen on the fender, refer to photos. The fender has a latch for the hood. The fender has a mud flap attached. There is minor corrosion seen on the fender. The casting number is 3518981C2. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used fender from the passenger side of a 2011 International ProStar Premium truck. Fender is in excellent condition and is showing no wear or tear, nor any damage of any kind. There are some very minor scratches in the paint, but nothing more. See photos and feel free to call or email us with any questions. We can ship Anywhere! Thank you for looking.

Good, used passenger side fender from a 2006 International 4300 truck. The fender has been inspected and seems to be in good condition. There is damage seen on the fender which you can see in the photos. There is very minor corrosion seen on the inside of the fender. The casting number is 220375-2. Please see the photos attached. If you have any further questions, please feel free to call or email us. We can ship Anywhere! Thank you.

Good, used driver side fender from a 2006 International 4300 truck. The fender has been inspected and seems to be in good condition. There is no damage seen on the fender which you can see in the photos. The fender does have some chips in the paint. There is very minor corrosion seen on the inside of the fender. The casting number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We can ship Anywhere! Thank you.

Good, used Passenger Side Fiberglass Fender Extension off a 2006 Sterling L7500 truck. The casting number is not visible. The fender extension has been inspected and does have a couple flaws. The fender extension does have some cracks in the fiberglass which you will see in the photos. The fender extension does have paint chipping off in spots. The non threaded bolt holes are in decent shape. See photos and give us a call if you have any further questions. We can ship Anywhere! Thank you.

Good used RH Rear End Cap fender off a 2000 Kenworth T600 truck, the part number is not visible. The driver side fairing fender is in good condition, the underneath bottom side is in really good shape which you can see from the pictures. Top side of the fender has a long scratch mark down the middle of it, it also has a rubber seal that runs along the outside part of the fairing fender. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used driver side inner fender off of a 2005 Freightliner M2 106 truck. The inner fender has been visually inspected and appears to be in good working condition. There is no visible damage seen on the inner fender. The inner fender has a fuse box attached. The casting number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used passenger side fender from a 2005 Hino 165 truck. Fender has been inspected and all is in good condition. The mud flap looks torn, so will need replaced. There is a crack and chipped part on the lower rear corner that can be easily repaired. See photos and call or message us if you have any questions. We can ship Anywhere! Thank you.

Good, used driver side fender from a 2011 International DuraStar 4300 truck. The fender has been inspected and seems to be in good condition. There is no visible damage seen anywhere on the fender. There is very minor corrosion seen on the inside of the fender. The casting number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Passenger Side fiberglass fender off a 2007 Freightliner truck. The casting number is not visible. This passenger side fender is in fairly good condition. The fender does have some minor scuff marks see on it. The fender does have a missing piece of the that you can see in the photos below. See photos and give us a call if you have any questions. We can ship Anywhere!. Thank you.

USED DOES NOT INCLUDE BRACKET, CRACK IN BOTTOM EDGE, SIZEABLE RUB WEAR FROM HOOD IN FRONT EDGE, SMALL HOLE DRILLED NEXT TO HOOD LATCH

Good used driver side fender from a 2012 International TranStar 8600 truck. A mud flap is attached and in decent shape, but is starting to tear on both sides. Hood latch looks firmly attached and is also included. There is some wear in certain places as will be shown in photos, but overall, this part is in good and solid condition with no repairs indicated anywhere. See photos and feel free to call or email us with any questions. We can ship Anywhere!! Thank you.

NEW 68" 430 SS HALF TANDEM BUY PACKAGE 2 SOLD INDIVIDUALLY See Video

Good used Driver side Fender from a 2007 International 94001 Truck. The Fender has been visually inspected and is in good condition. The fender has corrosion and scuff marks. The fender has a plastic flap attached, please refer to the photos provided, all other bolt holes are clean and clear from obstructions. The casting number is not available. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Driver side Fender from a 2007 International 94001 Truck. The fender has been visually inspected and is in good condition. The fender has scuff marks and corrosion. The fender has some damages, refer to photos. The fender has a broken bolt hole, please refer to the photos provided, all other bolt holes ae clean and clear from obstructions. The fender has a plastic flap still attached. The casting number is not available. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

NEW CSM Fiberglass 379LG Fender, Passenger Side, For 379 Peterbilt 1987 - 2007 * Dropped Side * 2 Inch Kick Out On The Rear Of The Fender FENDER ONLY, BRACKETS NOT INCLUDED, HAS SOME DEEP SCRATCHES ON TOP SURFACE, MULTIPLE AREAS OF SCUFFING, SOME SMALL CHIPS IN FIBERGLASS ON BOTTOM EDGE