SEARCH - Flywheel Housing

Good used Aluminum Flywheel housing from Cummins ISX15 engine. The Flywheel housing has been visually inspected and is in good working condition. The Flywheel housing has corrosion, please refer to the photos provided. The Flywheel housing has no signs of dents. All bolt holes are clean and clear from obstructions. The Casting number is 3103584. The Serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

USED USED GTO CUMMINS X12 FLYWHEEL HOUSING 5558741 FLYWHEEL HOUSING SAE SIZE OR TYPE: 1 FLYWHEEL HOUSING MATERIAL: ALUMINUM ENGINE MOUNT TYPE: REAR ENGINE MOUNTS TRANSMISSION MOUNTING HOLE NOMENCLATURE: SAE STARTING MOTOR MOUNTING SAE OR TYPE: 3 STARTING MOTOR MOUNTING HOLE NOMENCLATURE: SAE STARTER CENTER DISTANCE: 265.1 MM STARTER BORE DIAMETER: 92.15 MM STARTER ANGLE FROM HORIZONTAL: -5 DEG STARTER LOCATION: 2ND QUADRANT CLUTCH TYPE PROVISION: DRY REAR ENGINE POWER TAKE OFF: NO SENSOR MOUNTING HOLE NOMENCLATURE: 2ND QUADRANT, 3/4 - 16 REAR FACE OF BLOCK TO TRANSMISSION MOUNTING FACE: 150.0 MM ENGINE INSTALLATION: 2 DEG ROLL TOWARDS EXHAUST SIDE OFFSET ENGINE MOUNT COMPATIBLE: YES BENDING MOMENT LIMITS AS FOLLOWS: BENDING MOMENT AT RFOB: 1000 FT-LBS (GENERAL) / 500 FT-LBS (SEVERE) BENDING MOMENT AT FH PAD DUE TO AXIAL OFFSET REAR MOUNT: 361 FT-LBS (GENERAL) 180.5 FT-LBS (SEVERE) BENDING MOMENT AT FH PAD DUE TO LATERAL OFFSET REAR MOUNT: 482 FT-LBS (GENERAL) 241 FT-LBS (SEVERE)

NEW 5 THREADED HOLE ON RT 6 THREADED HOLE ON LT WITHOUT POWER TAKEOFF CT660 5900I SEVERE SERVICE N13 SERIES ENGINE

NEW 5 THREADED HOLE ON RT 6 THREADED HOLE ON LT WITHOUT POWER TAKEOFF CT660 5900I SEVERE SERVICE N13 SERIES ENGINE

Used CUMMINS 196298 FLYWHEEL HOUSING. USED. CAST IRON. V12 SERIES ENGINES. G28/V28. SUPERSEDED/XREF NUMBER 3013255. SAE #1

Used Cummins ISX Engine Flywheel Housing 3103591 From 2008 International Prostar VIN 2HSCUAPRX8C544562

Good used Aluminum Flywheel housing from Cummins ISX15 engine. The Flywheel housing has been visually inspected and is in good working condition. The Flywheel housing has corrosion, please refer to the photos provided. The Flywheel housing has no signs of dents. All bolt holes are clean and clear from obstructions. The Casting number is 3103584. The Serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

USED USED GTO CUMMINS ISX15 (3491) FLYWHEEL HOUSING 3103584 Flywheel Housing Flywheel Housing SAE Size: No. 1 Flywheel Housing Material: Aluminum Engine Mount Type: 10 Deg. Pads Transmission Mounting Hole Nomenclature: English (in) Starter Motor Mounting Screws: English (in) Starter Center Distance: 10.437 Clutch Type Provision: Dry Tachometer Sensor Mounting Hole Count: One

USED USED CAT C15 ACCERT, 10 DEGREE TILT ON ENGINE MOUNTS P/N 1694153

Good, used flywheel housing from a Volvo VED12 has been visually inspection and is in good working condition. There is minor scratch on the flywheel housing. There is minor corrosion on the flywheel Housing. The bolt holes are free from obstruction. There is minor paint chipping on the fly wheel housing. The casting number is 1285. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used fly wheel housing for a 2007 Mercedes MBE 900. The fly wheel housing has a little rust on it. The fly wheel housing has been inspected and is in good condition and ready to be installed. The casting number for the fly wheel housing is A 30401152402 and the engine serial number is unknown. There is no damage to the fly wheel housing. Please see the attached photos and if you have any further questions please feel free to contact us by phone or by e-mail. We ship anywhere! Thank-you!

Good, used flywheel housing from a Cummins ISX engine. The flywheel housing has been inspected and appears to be in good working condition. There is no visible damage to the flywheel housing. The bolt holes are clear and in good condition. The casting number is 3102195. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used aluminum flywheel housing from a Volvo D13 engine. The flywheel housing has been inspected and is in good working condition. There is no visible damage to the flywheel housing. There are 3 broken off bolts. There is minor rust seen on the part. The casting number is 1543896. The engine serial number is 933582. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel housing from a Volvo D13 engine. The flywheel housing has been inspected and appears to be in good working condition. There is no visible damage to the flywheel housing. There is minor corrosion seen on the flywheel housing. The casting number is 21347405. The engine serial number is D13*1096655*J1*H. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel housing from a 2005 CAT C13 engine. The flywheel housing has been inspected and is in good working condition. There is no visible damage seen on the flywheel housing. There is minor corrosion seen on the flywheel housing. Bolt holes are clear and in good condition. The casting number is 222-3089. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel housing from a Detroit 6-71 engine. The flywheel housing has been visually inspection and is in good working condition. There is minor scratch on the flywheel housing. There is minor corrosion on the flywheel Housing. There is minor rust on the flywheel housing. The bolt holes are free from obstruction. There is minor paint chipping on the fly wheel housing. The casting number is 8925252. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel housing from a Mercedes MBE 926 engine. The flywheel housing has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on the flywheel housing. There is corrosion around the flywheel housing, please refer to photos. The fittings are in good working condition. The contact has no visible damage and is in good working condition. The casting number is A9040152302. The engine serial number is 7DDXH7.20DJA. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel housing from an international DT466 engine. The flywheel housing has been visually inspected and is in good working condition. The flywheel housing has rust. The flywheel housing has corrosion, refer to photos. All bolt holes are clean and clear from obstructions. The casting numbers are 1820338C1, 1105E. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Used Detroit Diesel 60 Series 12.7L Engine Flywheel Housing 23522643 From 2004 Freightliner Centrury Class 120 VIN 1FUJBBCG14LM93266

Good, used flywheel housing from an International DT466 engine. The flywheel housing has been visually inspected and is in good working condition. There is no visible damage on the flywheel housing. The bolt holes are clean and clear from obstruction. The fittings are clear from damage and in good working condition. There is rust and corrosion around the flywheel housing, please check the pictures provided. The casting number is 184010005. The engine serial number is 2U3056039. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used flywheel housing from a International Maxxforce DT466 engine. The flywheel housing has been visually inspected and is in good working condition. There is no visible damage to the flywheel housing. The flywheel housing has minor rust. The casting number is 1842040C6. The engine serial number is 466HM2U3082538. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel housing from a Mercedes MBE 4000 engine. The flywheel housing has been visually inspected and is in good working condition. The flywheel housing has minor corrosion. One of the mounts are still attached to the flywheel housing. The casting number is A4570150302. The engine serial number is 0460874791. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel housing from a Volvo VED12 has been visually inspection and is in good working condition. There is minor scratch on the flywheel housing. There is minor corrosion on the flywheel Housing. The bolt holes are free from obstruction. There is minor paint chipping on the fly wheel housing. The casting number is not available. The engine serial number is D12D*95120072. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel housing from a Paccar MX13-EPA13 engine. The flywheel housing has been inspected and to be in good working condition. There is no visible damage to the flywheel housing. There is minor corrosion seen on the flywheel housing. The casting number is 1856592,1805902, 2184210PE The engine serial number is Y078966. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel housing from a International Maxxforce DT466 engine. The flywheel housing has been visually inspected and is in good working condition. There is no visible damage to the flywheel housing. The flywheel housing has minor rust. The casting number is 1842040C6. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used aluminum flywheel housing from CAT C12 engine. The flywheel housing has been inspected and is in good working condition. There is no visible damage seen on the part. There is visible rust. The casting number is 148-1973. The engine serial number is MBL12144. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!