SEARCH - Equipment (Whole Vehicle) - Page 1

Skid Steer VT-100 SPECS OPERATIONS Loader Arms Vertical Operating Weight10345 lbs Rated Operating Capacity @ 35%3500 lbs Ground Pressure4.0 psi Engine Power103.5 hp Loader ArmsVertical Operating Weight (Open Cab)10345 lbs Operating Weight (Closed Cab)10835 lbs Ground Pressure at Operating Weight4.0 psi Rated Operating Capacity (35% Of Tipping Load)3500 lbs Tipping Load10000 lbs Travel Speed, Maximum9.3 mph ENGINE Type Diesel 4-cylinder, Intercooled Turbo Model Yanmar 4TNV94FHT Cooling System Hydraulically-driven fan and anti-freeze filled radiator cooling system Intake Air Cleaner Three-stage Emission Controls Meets all U.S. EPA Tier 4 final standards Engine Power103.5 hp Displacement3.1 L Gross Horsepower103.5 hp Torque Peak291 ft-lb DRIVE TRAIN Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads Drive System Two hydrostatic direct drive sprockets controlled by a single joystick Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage Suspension Two independent torsion axles per undercarriage Roller Wheels 24 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings Track Width18 in. Length of Track on the Ground71 in. Ground Contact Area2556 in.2 Roller Wheel Diameter Front & rear wheels15 in Roller Wheel Diameter Middle Wheel10 in AUXILIARY HYDRAULIC Controls Intermittent via joystick button or continuous via console switch. High-flow is adjustable. Couplers Flat Faced Couplers: 1/2 in. low flow, 3/4 in. high flow Cooling System High efficiency side-by-side radiator and oil cooler Pump Capacity Low23 gpm Pump Capacity High41 gpm System Pressure Max Low3481 psi System Pressure Max High3989 psi ELECTRICAL SYSTEM Standard Features Block heater Outlets 1 -12 V port inside operator station Wiring Upgradeable wiring harness Charging System 80 amp alternator Nominal Charge12 V Battery950 CCA OPERATOR STATION Seat Mechanical suspension seat with 2 in. seat belt Controls Electronic joystick controls with ISO or H pattern settings, adjustable operator profiles and speeds Cab ROPS or All Weather Cab with curved glass door Engine Speed Standard foot pedal with hand dial option FOPS ISO 3449 Level 1 (level 2 optional), emergency roof exit ROPS ROPS: ISO 3471, Restraint-ISO 6683, SAE J2292, Cal OSHA 1596 Illumination 2 - Forward-facing LED lights, 2 - Rear-facing LED lights Standard Features ROPS with mechanical suspension seat, adjustable pilot controls, 7-in. deluxe color display, foot throttle, cupholder, phone holder, roof panel, roof insulation, rear window, two speed, high flow, Hyd Q/A, attachment control kit, Dual Direction Bucket Positioning 7-IN. Color Machine Display Fuel, tachometer, engine temp, hour meter, battery, trip meter, hydraulic temperature, water temperature, multiple languages SERVICE CAPACITY Fuel Tank34 gal DEF Capacity5 gal

Skid Steer VT-100 SPECS OPERATIONS Loader Arms Vertical Operating Weight10345 lbs Rated Operating Capacity @ 35%3500 lbs Ground Pressure4.0 psi Engine Power103.5 hp Loader ArmsVertical Operating Weight (Open Cab)10345 lbs Operating Weight (Closed Cab)10835 lbs Ground Pressure at Operating Weight4.0 psi Rated Operating Capacity (35% Of Tipping Load)3500 lbs Tipping Load10000 lbs Travel Speed, Maximum9.3 mph ENGINE Type Diesel 4-cylinder, Intercooled Turbo Model Yanmar 4TNV94FHT Cooling System Hydraulically-driven fan and anti-freeze filled radiator cooling system Intake Air Cleaner Three-stage Emission Controls Meets all U.S. EPA Tier 4 final standards Engine Power103.5 hp Displacement3.1 L Gross Horsepower103.5 hp Torque Peak291 ft-lb DRIVE TRAIN Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads Drive System Two hydrostatic direct drive sprockets controlled by a single joystick Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage Suspension Two independent torsion axles per undercarriage Roller Wheels 24 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings Track Width18 in. Length of Track on the Ground71 in. Ground Contact Area2556 in.2 Roller Wheel Diameter Front & rear wheels15 in Roller Wheel Diameter Middle Wheel10 in AUXILIARY HYDRAULIC Controls Intermittent via joystick button or continuous via console switch. High-flow is adjustable. Couplers Flat Faced Couplers: 1/2 in. low flow, 3/4 in. high flow Cooling System High efficiency side-by-side radiator and oil cooler Pump Capacity Low23 gpm Pump Capacity High41 gpm System Pressure Max Low3481 psi System Pressure Max High3989 psi ELECTRICAL SYSTEM Standard Features Block heater Outlets 1 -12 V port inside operator station Wiring Upgradeable wiring harness Charging System 80 amp alternator Nominal Charge12 V Battery950 CCA OPERATOR STATION Seat Mechanical suspension seat with 2 in. seat belt Controls Electronic joystick controls with ISO or H pattern settings, adjustable operator profiles and speeds Cab ROPS or All Weather Cab with curved glass door Engine Speed Standard foot pedal with hand dial option FOPS ISO 3449 Level 1 (level 2 optional), emergency roof exit ROPS ROPS: ISO 3471, Restraint-ISO 6683, SAE J2292, Cal OSHA 1596 Illumination 2 - Forward-facing LED lights, 2 - Rear-facing LED lights Standard Features ROPS with mechanical suspension seat, adjustable pilot controls, 7-in. deluxe color display, foot throttle, cupholder, phone holder, roof panel, roof insulation, rear window, two speed, high flow, Hyd Q/A, attachment control kit, Dual Direction Bucket Positioning 7-IN. Color Machine Display Fuel, tachometer, engine temp, hour meter, battery, trip meter, hydraulic temperature, water temperature, multiple languages SERVICE CAPACITY Fuel Tank34 gal DEF Capacity5 gal

Skid Steer RT-135 Forestry Specs OPERATIONS Loader Arms Radial Operating Weight12990 lbs Rated Operating Capacity @ 35%4150 lbs Rated Operating Capacity @ 50%5929 lbs Ground Pressure4.6 psi Engine Power132 hp Tipping Load11858 lbs Travel Speed, Maximum - 1st Speed6 mph Travel Speed, Maximum - 2nd Speed10 mph ENGINE Type Diesel 4-cylinder, turbo charged Model Cummins QSF3.8 Cooling System Temperature-controlled, variable speed and operator time-selectable, hydraulically-driven, auto-reversing fan and coolant/anti-freeze-filled radiator Intake Air Cleaner Three-stage Emission Controls Meets all U.S. EPA Tier 4 final standards Standard Feature Auto Idle Engine Power132 hp Gross Power Rating132 hp Torque Peak360 ft-lb DRIVE TRAIN Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Drive System Two hydrostatic direct drive sprockets controlled by a single joystick Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage suspension Two independent torsion axles per undercarriage Roller Wheels 24 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings Track Width20 in Length of Track on the Ground71 in Ground Contact Area2840 in2 Roller Wheel Diameter Front & rear wheels15 in Roller Wheel Diameter Middle Wheel10 in AUXILIARY HYDRAULIC Controls Intermittent via joystick button or continuous via console switch. High-flow is adjustable and loader/auxiliary sharing is adjustable via machine display Couplers Push-to-connect quick couplers mounted on loader arms. Pressure relief valve on coupler block Cooling System High efficiency side-by-side radiator and oil cooler Pump Capacity Low20 gpm Pump Capacity High50 gpm System Pressure Max Low3300 psi System Pressure Max High4060 psi ELECTRICAL SYSTEM Standard Features Attachment control kit, block heater Wiring Pre-wired for all factory-available accessories Outlets 1 - 12 V inside operator station Charging System 120 Amp Nominal Charge12 V Battery950 CCA OPERATOR STATION Seat Adjustable air ride contour vinyl seat with built-in operator presence switch, lap bar and 2 in. ( 51 mm ) wide seat belt, operator manual pouch Loader Control Right-hand electronic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic. Loader speed is adjustable and selectable from ISO or H control pattern Drive Control : Left-hand electronic joystick controls machine speed and direction. Track speed is adjustable, includes a Creep Mode and is selectable from ISO or H control pattern Engine Speed Hand-operated throttle and foot throttle 7-Inch Color Machine Display Engine RPM, engine oil pressure, hydraulic oil high temperature, engine coolant temperature, battery voltage, hour meter, fuel level, trip meter, engine diagnostics, system monitoring, fault logging, integrated rear view camera, password protection with user profiles, job clock, maintenance schedules, Def level, Adjustable controls, Adjustable hydraulic flows, winch (optional) control. ROPS ISO 8082-Forestry FOPS ISO 8083-Forestry OPS ISO 8084-Forestry, BC WCB G603 - Window guards for forestry, BC WCB G604 - Light duty screen guards for off highway, BC WCB G608 - Heavy duty roof structure, ISO 6683 - Seat belt anchors, CAL OSHA 1596 - Seat belt, SAE J2292 - Shoulder restraint (when equipped with 3 point options), ISO 11839 - Forestry thrown object guard Illumination 2 - Adjustable forward-facing LED lights, 2 - Adjustable rear-facing LED lights, 1 - Interior light, 2 - LED side lights Convenience 12 V power port Standard Features Horn, backup alarm, cup holder, phone holder, behind seat storage, rear view mirror, lapbar, roof escape hatch, roof panel & rear cab windows. Adjustable joystick & arm rest positions, adjustable directional & air flow HVAC vents, radio with bluetooth & USB, frameless front door, attachment control kit, wiper/washer, easy-off door SERVICE CAPACITY Fuel Tank52 gal Hydraulic Tank22 gal Engine Coolant5.5 gal Engine Oil (Including Filter)12 quarts

Skid Steer RT-135 FORESTRY OPERATIONS Loader Arms Radial Operating Weight12990 lbs Rated Operating Capacity @ 35%4150 lbs Rated Operating Capacity @ 50%5929 lbs Ground Pressure4.6 psi Engine Power132 hp Tipping Load11858 lbs Travel Speed, Maximum - 1st Speed6 mph Travel Speed, Maximum - 2nd Speed10 mph ENGINE Type Diesel 4-cylinder, turbo charged Model Cummins QSF3.8 Cooling System Temperature-controlled, variable speed and operator time-selectable, hydraulically-driven, auto-reversing fan and coolant/anti-freeze-filled radiator Intake Air Cleaner Three-stage Emission Controls Meets all U.S. EPA Tier 4 final standards Standard Feature Auto Idle Engine Power132 hp Gross Power Rating132 hp Torque Peak360 ft-lb DRIVE TRAIN Track Type General purpose track constructed of rubber compound with embedded co-polymer cords and all-purpose treads. Drive System Two hydrostatic direct drive sprockets controlled by a single joystick Track Drive Sprocket Elevated with low friction, replaceable sprocket rollers Undercarriage suspension Two independent torsion axles per undercarriage Roller Wheels 24 high-density polyurethane and rubber wheels per track. Wheels include sealed bearings Track Width20 in Length of Track on the Ground71 in Ground Contact Area2840 in2 Roller Wheel Diameter Front & rear wheels15 in Roller Wheel Diameter Middle Wheel10 in AUXILIARY HYDRAULIC Controls Intermittent via joystick button or continuous via console switch. High-flow is adjustable and loader/auxiliary sharing is adjustable via machine display Couplers Push-to-connect quick couplers mounted on loader arms. Pressure relief valve on coupler block Cooling System High efficiency side-by-side radiator and oil cooler Pump Capacity Low20 gpm Pump Capacity High50 gpm System Pressure Max Low3300 psi System Pressure Max High4060 psi ELECTRICAL SYSTEM Standard Features Attachment control kit, block heater Wiring Pre-wired for all factory-available accessories Outlets 1 - 12 V inside operator station Charging System 120 Amp Nominal Charge12 V Battery950 CCA OPERATOR STATION Seat Adjustable air ride contour vinyl seat with built-in operator presence switch, lap bar and 2 in. ( 51 mm ) wide seat belt, operator manual pouch Loader Control Right-hand electronic joystick controls loader lift, lower and tilt, plus intermittent control of auxiliary hydraulic. Loader speed is adjustable and selectable from ISO or H control pattern Drive Control : Left-hand electronic joystick controls machine speed and direction. Track speed is adjustable, includes a Creep Mode and is selectable from ISO or H control pattern Engine Speed Hand-operated throttle and foot throttle 7-Inch Color Machine Display Engine RPM, engine oil pressure, hydraulic oil high temperature, engine coolant temperature, battery voltage, hour meter, fuel level, trip meter, engine diagnostics, system monitoring, fault logging, integrated rear view camera, password protection with user profiles, job clock, maintenance schedules, Def level, Adjustable controls, Adjustable hydraulic flows, winch (optional) control. ROPS ISO 8082-Forestry FOPS ISO 8083-Forestry OPS ISO 8084-Forestry, BC WCB G603 - Window guards for forestry, BC WCB G604 - Light duty screen guards for off highway, BC WCB G608 - Heavy duty roof structure, ISO 6683 - Seat belt anchors, CAL OSHA 1596 - Seat belt, SAE J2292 - Shoulder restraint (when equipped with 3 point options), ISO 11839 - Forestry thrown object guard Illumination 2 - Adjustable forward-facing LED lights, 2 - Adjustable rear-facing LED lights, 1 - Interior light, 2 - LED side lights Convenience 12 V power port Standard Features Horn, backup alarm, cup holder, phone holder, behind seat storage, rear view mirror, lapbar, roof escape hatch, roof panel & rear cab windows. Adjustable joystick & arm rest positions, adjustable directional & air flow HVAC vents, radio with bluetooth & USB, frameless front door, attachment control kit, wiper/washer, easy-off door