SEARCH - Equipment (Whole Vehicle)

By Damage

Side Impact
Front Impact

Your search has 12 matches. Now showing results 1 through 12.
Equipment (Whole Vehicle)    Keywords: Forklift | Fork

FEATURED ITEMS

$35500.00

2018 ASV RT30 Equipment (Whole Vehicle)

Tag #: 17ASVRT30
 
2018 unit with Cold Weather Cab CWC Operating Specs: Operating weight: 3,600 lb / 1633 kg Ground pressure @ operating weight: 3.0 psi / 20.7 kPa Rated operating capacity (35% tipping load): 665 lbs / 302 kg Tipping load: 1,900 lb / 862 kg Travel speed, max.: 5.3 mph / 8.5 kph Engine: Type: Diesel, 3-cylinder, naturally-aspirated Model: Perkins 403D-15 Displacement: 92 cu. in. / 1.5 L Gross power rating @ 2800 rpm: 32.7 hp / 25.1 kW Emission controls: Meets all US EPA Tier 4 final standards Undercarriage: Track type: General purpose track costructed of rubber compound with embedded co-polymer cords and all-purpose treads. A smooth-tread "Turf Track" is optionally available. A single row of rubber track lugs is molded into the track. Track width: 11 in. / 279 mm Length of track on ground: 55 in. / 1397 mm Ground contact area: 1183 sq. in. / .79 sq. m. Drive system: Two hydrostatic direct-drive sprockets conrolled by a single joystick. Track drive sprockets: Elevated, with low-friction, replaceable sprocket rollers. Undercarriage suspension: Two independent torsion axles per undercarriage (side). Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels have sealed roller bearings. Roller wheel diameter: 10 in. / 254 mm Aux. Hydraulics: Pump capacity: 10 gpm / 37.9 lpm System pressure, max.: 3,000 psi / 20684 kPa Controls: Intermittent via button on loader control joystick or continuous via dash-mounted switch. Couplers: Push-to-connect quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block. Cooling system: High-efficiency hydraulic oil cooler beside (not stacked) engine radiator. Electrical: Nominal charge: 12 V Battery: 630 CCA Charging system: 65-amp alternator Convenience outlet: One 12-VDC port inside operator station Wiring: Pre-wired for all facrtory-available accessories Operator Station: Seat: Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2-inch (51 mm) wide seat belt. An adjustable suspension seat is optional. Loader controls: Right-hand pilot operated hydraulic joystick controls loader lift, lower and tilt. Joystick also has intermittent control button for auxiliary hydraulics. Drive control: Left-hand pilot-operated hydraulic joystick controls machine speed and direction. Engine speed: Hand-operated throttle lever. Indicators & gauges: Engine oil low-pressure light; Hydraulic oil high-temp light; Engine high-temp light; Low battery voltage light; Hourmeter; Fuel gauge. ROPS: Meets SAE J1040 MAY 94 and ISO 3471. FOPS: Meets SAE J1043 SEPT87 and ISO 3449. Illumination: Four fixed forward-facing halogen lights; one adjustable rear-facing halogen light; one interior light. Audible alarms: Horn and back-up alarm are standard. Refill Cap. Fuel tank: 10 gal / 37.9 L Hydraulic tank: 8 gal / 30.3 L Engine coolant / antifreeze: 1.5 gal / 5.6 L Engine oil, including filter: 6.3 quarts / 6 L Attachments(Not Included): The following attachemnts are available as options: Auger drive and bits Backhoe Broom, rotary Bucket, GP Bucket, light-material Bucket, multi-purpose Brush cutter, rotary Dozer blade Eliminator rake Grapple bucket Pallet forks Power box rake Snow blade Snow blower Stump grinder Trencher Vibratory roller ID:
Tag #: 17ASVRT30

VIN #: TEMPLATE

2018 unit with Cold Weather Cab CWC Operating Specs: Operating weight: 3,600 lb / 1633 kg Ground pressure @ operating weight: 3.0 psi / 20.7 kPa Rated operating capacity (35% tipping load): 665 lbs / 302 kg Tipping load: 1,900 lb / 862 kg Travel speed, max.: 5.3 mph / 8.5 kph Engine: Type: Diesel, 3-cylinder, naturally-aspirated Model: Perkins 403D-15 Displacement: 92 cu. in. / 1.5 L Gross power rating @ 2800 rpm: 32.7 hp / 25.1 kW Emission controls: Meets all US EPA Tier 4 final standards Undercarriage: Track type: General purpose track costructed of rubber compound with embedded co-polymer cords and all-purpose treads. A smooth-tread "Turf Track" is optionally available. A single row of rubber track lugs is molded into the track. Track width: 11 in. / 279 mm Length of track on ground: 55 in. / 1397 mm Ground contact area: 1183 sq. in. / .79 sq. m. Drive system: Two hydrostatic direct-drive sprockets conrolled by a single joystick. Track drive sprockets: Elevated, with low-friction, replaceable sprocket rollers. Undercarriage suspension: Two independent torsion axles per undercarriage (side). Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels have sealed roller bearings. Roller wheel diameter: 10 in. / 254 mm Aux. Hydraulics: Pump capacity: 10 gpm / 37.9 lpm System pressure, max.: 3,000 psi / 20684 kPa Controls: Intermittent via button on loader control joystick or continuous via dash-mounted switch. Couplers: Push-to-connect quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block. Cooling system: High-efficiency hydraulic oil cooler beside (not stacked) engine radiator. Electrical: Nominal charge: 12 V Battery: 630 CCA Charging system: 65-amp alternator Convenience outlet: One 12-VDC port inside operator station Wiring: Pre-wired for all facrtory-available accessories Operator Station: Seat: Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2-inch (51 mm) wide seat belt. An adjustable suspension seat is optional. Loader controls: Right-hand pilot operated hydraulic joystick controls loader lift, lower and tilt. Joystick also has intermittent control button for auxiliary hydraulics. Drive control: Left-hand pilot-operated hydraulic joystick controls machine speed and direction. Engine speed: Hand-operated throttle lever. Indicators & gauges: Engine oil low-pressure light; Hydraulic oil high-temp light; Engine high-temp light; Low battery voltage light; Hourmeter; Fuel gauge. ROPS: Meets SAE J1040 MAY 94 and ISO 3471. FOPS: Meets SAE J1043 SEPT87 and ISO 3449. Illumination: Four fixed forward-facing halogen lights; one adjustable rear-facing halogen light; one interior light. Audible alarms: Horn and back-up alarm are standard. Refill Cap. Fuel tank: 10 gal / 37.9 L Hydraulic tank: 8 gal / 30.3 L Engine coolant / antifreeze: 1.5 gal / 5.6 L Engine oil, including filter: 6.3 quarts / 6 L Attachments(Not Included): The following attachemnts are available as options: Auger drive and bits Backhoe Broom, rotary Bucket, GP Bucket, light-material Bucket, multi-purpose Brush cutter, rotary Dozer blade Eliminator rake Grapple bucket Pallet forks Power box rake Snow blade Snow blower Stump grinder Trencher Vibratory roller ID: Engine: Perkins 403D-15

HP: 33

Hours: 0

Fuel Type: Diesel

Air Conditioning: No

Heat: Option

Lift Capacity: 1900

Reach: 101" Center of pin

Controls: LH joystick for drive / RH joystick for attachment controls

Front Tires: Rubber track 11" width 55" length

Drive: Hydrostatic

ALL RESULTS

$64900.00

2015 TEREX PT110 Equipment (Whole Vehicle)

Tag #: 15TX001
 
PT110 Compact Track Loader The new Terex PT-110 compact track loaders offer operators higher peak engine torque, the highest hydraulic flow and top travel speeds in the large-frame size class. Ideal for general construction, utility, landscape and vegetation management work, the PT-110 loaders are designed with the same features that have made Terex compact track loaders among the best-selling models in the industry. A few new features include a diesel particulate filter and after-cooled Tier 4i-compliant engine for improved performance, a hydraulic fan cooling system for efficient cooling and more production, as well as an open design for ease of access to all critical components to enhance serviceability. Interim Tier 4 Perkins engine with 332 ft-lbs of peak torque Hydraulic fan for optimum cooling and reduced engine HP draw Advanced undercarriage including multi-level suspension for exceptional traction and operator comfort. Two-speed hydrostatic drive system offers fast travel speed and high torque work speed. Selectable creep mode. Easy operation with pilot-operated joystick controls. Selectable ISO or "H" control pattern, and adjustable loader speed and sensitivity without sacrificing operating capacity or breakouts. Standard load sensing high-flow auxiliary hydraulics and high-capacity cooling system are ideal for demanding applications like brush cutting, mulching , cold planing and more. Engine power kW (hp) 82.7 (111) Ground pressure kg/cm squared (psi) 0.29 (4.1) Rated operating capacity kg (lbs) 724 (3,800) Optional Attachments: Auger & bits Bucket, multi-purpose Pallet forks Trencher Backhoe Brush cutter, rotary Power box rake Vibratory roller Broom, rotary Dozer blade Snow blade Bucket, general purpose Land Leveler Snow blower Bucket, light material Mulching head Stump grinder ID:
Tag #: 15TX001

VIN #: ASVPT110K5WS00607

PT110 Compact Track Loader The new Terex PT-110 compact track loaders offer operators higher peak engine torque, the highest hydraulic flow and top travel speeds in the large-frame size class. Ideal for general construction, utility, landscape and vegetation management work, the PT-110 loaders are designed with the same features that have made Terex compact track loaders among the best-selling models in the industry. A few new features include a diesel particulate filter and after-cooled Tier 4i-compliant engine for improved performance, a hydraulic fan cooling system for efficient cooling and more production, as well as an open design for ease of access to all critical components to enhance serviceability. Interim Tier 4 Perkins engine with 332 ft-lbs of peak torque Hydraulic fan for optimum cooling and reduced engine HP draw Advanced undercarriage including multi-level suspension for exceptional traction and operator comfort. Two-speed hydrostatic drive system offers fast travel speed and high torque work speed. Selectable creep mode. Easy operation with pilot-operated joystick controls. Selectable ISO or "H" control pattern, and adjustable loader speed and sensitivity without sacrificing operating capacity or breakouts. Standard load sensing high-flow auxiliary hydraulics and high-capacity cooling system are ideal for demanding applications like brush cutting, mulching , cold planing and more. Engine power kW (hp) 82.7 (111) Ground pressure kg/cm squared (psi) 0.29 (4.1) Rated operating capacity kg (lbs) 724 (3,800) Optional Attachments: Auger & bits Bucket, multi-purpose Pallet forks Trencher Backhoe Brush cutter, rotary Power box rake Vibratory roller Broom, rotary Dozer blade Snow blade Bucket, general purpose Land Leveler Snow blower Bucket, light material Mulching head Stump grinder ID: Engine: Tier 4 Perkins 4 cyl. turbo engine

HP: 111 HP / Torque 332 lb

Hours: 3

Attachments: Avalible / not included

Other: Operating weight 11,100 lbs / Tipping load 7600 lbs

Fuel Type: Diesel

Air Conditioning: Yes

Heat: Yes

Lift Capacity: 50% tipping load 3800 lbs

Controls: pilot-operated joystick controls. Selectable ISO or "H" control pattern

Front Tires: 18" tracks

Drive: Two speed

$35500.00

2018 ASV RT30 Equipment (Whole Vehicle)

Tag #: 17ASVRT30
 
2018 unit with Cold Weather Cab CWC Operating Specs: Operating weight: 3,600 lb / 1633 kg Ground pressure @ operating weight: 3.0 psi / 20.7 kPa Rated operating capacity (35% tipping load): 665 lbs / 302 kg Tipping load: 1,900 lb / 862 kg Travel speed, max.: 5.3 mph / 8.5 kph Engine: Type: Diesel, 3-cylinder, naturally-aspirated Model: Perkins 403D-15 Displacement: 92 cu. in. / 1.5 L Gross power rating @ 2800 rpm: 32.7 hp / 25.1 kW Emission controls: Meets all US EPA Tier 4 final standards Undercarriage: Track type: General purpose track costructed of rubber compound with embedded co-polymer cords and all-purpose treads. A smooth-tread "Turf Track" is optionally available. A single row of rubber track lugs is molded into the track. Track width: 11 in. / 279 mm Length of track on ground: 55 in. / 1397 mm Ground contact area: 1183 sq. in. / .79 sq. m. Drive system: Two hydrostatic direct-drive sprockets conrolled by a single joystick. Track drive sprockets: Elevated, with low-friction, replaceable sprocket rollers. Undercarriage suspension: Two independent torsion axles per undercarriage (side). Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels have sealed roller bearings. Roller wheel diameter: 10 in. / 254 mm Aux. Hydraulics: Pump capacity: 10 gpm / 37.9 lpm System pressure, max.: 3,000 psi / 20684 kPa Controls: Intermittent via button on loader control joystick or continuous via dash-mounted switch. Couplers: Push-to-connect quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block. Cooling system: High-efficiency hydraulic oil cooler beside (not stacked) engine radiator. Electrical: Nominal charge: 12 V Battery: 630 CCA Charging system: 65-amp alternator Convenience outlet: One 12-VDC port inside operator station Wiring: Pre-wired for all facrtory-available accessories Operator Station: Seat: Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2-inch (51 mm) wide seat belt. An adjustable suspension seat is optional. Loader controls: Right-hand pilot operated hydraulic joystick controls loader lift, lower and tilt. Joystick also has intermittent control button for auxiliary hydraulics. Drive control: Left-hand pilot-operated hydraulic joystick controls machine speed and direction. Engine speed: Hand-operated throttle lever. Indicators & gauges: Engine oil low-pressure light; Hydraulic oil high-temp light; Engine high-temp light; Low battery voltage light; Hourmeter; Fuel gauge. ROPS: Meets SAE J1040 MAY 94 and ISO 3471. FOPS: Meets SAE J1043 SEPT87 and ISO 3449. Illumination: Four fixed forward-facing halogen lights; one adjustable rear-facing halogen light; one interior light. Audible alarms: Horn and back-up alarm are standard. Refill Cap. Fuel tank: 10 gal / 37.9 L Hydraulic tank: 8 gal / 30.3 L Engine coolant / antifreeze: 1.5 gal / 5.6 L Engine oil, including filter: 6.3 quarts / 6 L Attachments(Not Included): The following attachemnts are available as options: Auger drive and bits Backhoe Broom, rotary Bucket, GP Bucket, light-material Bucket, multi-purpose Brush cutter, rotary Dozer blade Eliminator rake Grapple bucket Pallet forks Power box rake Snow blade Snow blower Stump grinder Trencher Vibratory roller ID:
Tag #: 17ASVRT30

VIN #: TEMPLATE

2018 unit with Cold Weather Cab CWC Operating Specs: Operating weight: 3,600 lb / 1633 kg Ground pressure @ operating weight: 3.0 psi / 20.7 kPa Rated operating capacity (35% tipping load): 665 lbs / 302 kg Tipping load: 1,900 lb / 862 kg Travel speed, max.: 5.3 mph / 8.5 kph Engine: Type: Diesel, 3-cylinder, naturally-aspirated Model: Perkins 403D-15 Displacement: 92 cu. in. / 1.5 L Gross power rating @ 2800 rpm: 32.7 hp / 25.1 kW Emission controls: Meets all US EPA Tier 4 final standards Undercarriage: Track type: General purpose track costructed of rubber compound with embedded co-polymer cords and all-purpose treads. A smooth-tread "Turf Track" is optionally available. A single row of rubber track lugs is molded into the track. Track width: 11 in. / 279 mm Length of track on ground: 55 in. / 1397 mm Ground contact area: 1183 sq. in. / .79 sq. m. Drive system: Two hydrostatic direct-drive sprockets conrolled by a single joystick. Track drive sprockets: Elevated, with low-friction, replaceable sprocket rollers. Undercarriage suspension: Two independent torsion axles per undercarriage (side). Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels have sealed roller bearings. Roller wheel diameter: 10 in. / 254 mm Aux. Hydraulics: Pump capacity: 10 gpm / 37.9 lpm System pressure, max.: 3,000 psi / 20684 kPa Controls: Intermittent via button on loader control joystick or continuous via dash-mounted switch. Couplers: Push-to-connect quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block. Cooling system: High-efficiency hydraulic oil cooler beside (not stacked) engine radiator. Electrical: Nominal charge: 12 V Battery: 630 CCA Charging system: 65-amp alternator Convenience outlet: One 12-VDC port inside operator station Wiring: Pre-wired for all facrtory-available accessories Operator Station: Seat: Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2-inch (51 mm) wide seat belt. An adjustable suspension seat is optional. Loader controls: Right-hand pilot operated hydraulic joystick controls loader lift, lower and tilt. Joystick also has intermittent control button for auxiliary hydraulics. Drive control: Left-hand pilot-operated hydraulic joystick controls machine speed and direction. Engine speed: Hand-operated throttle lever. Indicators & gauges: Engine oil low-pressure light; Hydraulic oil high-temp light; Engine high-temp light; Low battery voltage light; Hourmeter; Fuel gauge. ROPS: Meets SAE J1040 MAY 94 and ISO 3471. FOPS: Meets SAE J1043 SEPT87 and ISO 3449. Illumination: Four fixed forward-facing halogen lights; one adjustable rear-facing halogen light; one interior light. Audible alarms: Horn and back-up alarm are standard. Refill Cap. Fuel tank: 10 gal / 37.9 L Hydraulic tank: 8 gal / 30.3 L Engine coolant / antifreeze: 1.5 gal / 5.6 L Engine oil, including filter: 6.3 quarts / 6 L Attachments(Not Included): The following attachemnts are available as options: Auger drive and bits Backhoe Broom, rotary Bucket, GP Bucket, light-material Bucket, multi-purpose Brush cutter, rotary Dozer blade Eliminator rake Grapple bucket Pallet forks Power box rake Snow blade Snow blower Stump grinder Trencher Vibratory roller ID: Engine: Perkins 403D-15

HP: 33

Hours: 0

Fuel Type: Diesel

Air Conditioning: No

Heat: Option

Lift Capacity: 1900

Reach: 101" Center of pin

Controls: LH joystick for drive / RH joystick for attachment controls

Front Tires: Rubber track 11" width 55" length

Drive: Hydrostatic

$35500.00

2018 ASV RT30 CWC Equipment (Whole Vehicle)

Tag #: 18AS004
 
2018 unit with Cold Weather Cab CWC Operating Specs: Operating weight: 3,600 lb / 1633 kg Ground pressure @ operating weight: 3.0 psi / 20.7 kPa Rated operating capacity (35% tipping load): 665 lbs / 302 kg Tipping load: 1,900 lb / 862 kg Travel speed, max.: 5.3 mph / 8.5 kph Engine: Type: Diesel, 3-cylinder, naturally-aspirated Model: Perkins 403D-15 Displacement: 92 cu. in. / 1.5 L Gross power rating @ 2800 rpm: 32.7 hp / 25.1 kW Emission controls: Meets all US EPA Tier 4 final standards Undercarriage: Track type: General purpose track costructed of rubber compound with embedded co-polymer cords and all-purpose treads. A smooth-tread "Turf Track" is optionally available. A single row of rubber track lugs is molded into the track. Track width: 11 in. / 279 mm Length of track on ground: 55 in. / 1397 mm Ground contact area: 1183 sq. in. / .79 sq. m. Drive system: Two hydrostatic direct-drive sprockets conrolled by a single joystick. Track drive sprockets: Elevated, with low-friction, replaceable sprocket rollers. Undercarriage suspension: Two independent torsion axles per undercarriage (side). Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels have sealed roller bearings. Roller wheel diameter: 10 in. / 254 mm Aux. Hydraulics: Pump capacity: 10 gpm / 37.9 lpm System pressure, max.: 3,000 psi / 20684 kPa Controls: Intermittent via button on loader control joystick or continuous via dash-mounted switch. Couplers: Push-to-connect quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block. Cooling system: High-efficiency hydraulic oil cooler beside (not stacked) engine radiator. Electrical: Nominal charge: 12 V Battery: 630 CCA Charging system: 65-amp alternator Convenience outlet: One 12-VDC port inside operator station Wiring: Pre-wired for all facrtory-available accessories Operator Station: Seat: Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2-inch (51 mm) wide seat belt. An adjustable suspension seat is optional. Loader controls: Right-hand pilot operated hydraulic joystick controls loader lift, lower and tilt. Joystick also has intermittent control button for auxiliary hydraulics. Drive control: Left-hand pilot-operated hydraulic joystick controls machine speed and direction. Engine speed: Hand-operated throttle lever. Indicators & gauges: Engine oil low-pressure light; Hydraulic oil high-temp light; Engine high-temp light; Low battery voltage light; Hourmeter; Fuel gauge. ROPS: Meets SAE J1040 MAY 94 and ISO 3471. FOPS: Meets SAE J1043 SEPT87 and ISO 3449. Illumination: Four fixed forward-facing halogen lights; one adjustable rear-facing halogen light; one interior light. Audible alarms: Horn and back-up alarm are standard. Refill Cap. Fuel tank: 10 gal / 37.9 L Hydraulic tank: 8 gal / 30.3 L Engine coolant / antifreeze: 1.5 gal / 5.6 L Engine oil, including filter: 6.3 quarts / 6 L Attachments(Not Included): The following attachemnts are available as options: Auger drive and bits Backhoe Broom, rotary Bucket, GP Bucket, light-material Bucket, multi-purpose Brush cutter, rotary Dozer blade Eliminator rake Grapple bucket Pallet forks Power box rake Snow blade Snow blower Stump grinder Trencher Vibratory roller ID:
Tag #: 18AS004

VIN #: ASVRT030CJDS08019

2018 unit with Cold Weather Cab CWC Operating Specs: Operating weight: 3,600 lb / 1633 kg Ground pressure @ operating weight: 3.0 psi / 20.7 kPa Rated operating capacity (35% tipping load): 665 lbs / 302 kg Tipping load: 1,900 lb / 862 kg Travel speed, max.: 5.3 mph / 8.5 kph Engine: Type: Diesel, 3-cylinder, naturally-aspirated Model: Perkins 403D-15 Displacement: 92 cu. in. / 1.5 L Gross power rating @ 2800 rpm: 32.7 hp / 25.1 kW Emission controls: Meets all US EPA Tier 4 final standards Undercarriage: Track type: General purpose track costructed of rubber compound with embedded co-polymer cords and all-purpose treads. A smooth-tread "Turf Track" is optionally available. A single row of rubber track lugs is molded into the track. Track width: 11 in. / 279 mm Length of track on ground: 55 in. / 1397 mm Ground contact area: 1183 sq. in. / .79 sq. m. Drive system: Two hydrostatic direct-drive sprockets conrolled by a single joystick. Track drive sprockets: Elevated, with low-friction, replaceable sprocket rollers. Undercarriage suspension: Two independent torsion axles per undercarriage (side). Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels have sealed roller bearings. Roller wheel diameter: 10 in. / 254 mm Aux. Hydraulics: Pump capacity: 10 gpm / 37.9 lpm System pressure, max.: 3,000 psi / 20684 kPa Controls: Intermittent via button on loader control joystick or continuous via dash-mounted switch. Couplers: Push-to-connect quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block. Cooling system: High-efficiency hydraulic oil cooler beside (not stacked) engine radiator. Electrical: Nominal charge: 12 V Battery: 630 CCA Charging system: 65-amp alternator Convenience outlet: One 12-VDC port inside operator station Wiring: Pre-wired for all facrtory-available accessories Operator Station: Seat: Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2-inch (51 mm) wide seat belt. An adjustable suspension seat is optional. Loader controls: Right-hand pilot operated hydraulic joystick controls loader lift, lower and tilt. Joystick also has intermittent control button for auxiliary hydraulics. Drive control: Left-hand pilot-operated hydraulic joystick controls machine speed and direction. Engine speed: Hand-operated throttle lever. Indicators & gauges: Engine oil low-pressure light; Hydraulic oil high-temp light; Engine high-temp light; Low battery voltage light; Hourmeter; Fuel gauge. ROPS: Meets SAE J1040 MAY 94 and ISO 3471. FOPS: Meets SAE J1043 SEPT87 and ISO 3449. Illumination: Four fixed forward-facing halogen lights; one adjustable rear-facing halogen light; one interior light. Audible alarms: Horn and back-up alarm are standard. Refill Cap. Fuel tank: 10 gal / 37.9 L Hydraulic tank: 8 gal / 30.3 L Engine coolant / antifreeze: 1.5 gal / 5.6 L Engine oil, including filter: 6.3 quarts / 6 L Attachments(Not Included): The following attachemnts are available as options: Auger drive and bits Backhoe Broom, rotary Bucket, GP Bucket, light-material Bucket, multi-purpose Brush cutter, rotary Dozer blade Eliminator rake Grapple bucket Pallet forks Power box rake Snow blade Snow blower Stump grinder Trencher Vibratory roller ID:
$35500.00

2018 ASV RT30 CWC Equipment (Whole Vehicle)

Tag #: 18AS005
 
2018 unit with Cold Weather Cab CWC Operating Specs: Operating weight: 3,600 lb / 1633 kg Ground pressure @ operating weight: 3.0 psi / 20.7 kPa Rated operating capacity (35% tipping load): 665 lbs / 302 kg Tipping load: 1,900 lb / 862 kg Travel speed, max.: 5.3 mph / 8.5 kph Engine: Type: Diesel, 3-cylinder, naturally-aspirated Model: Perkins 403D-15 Displacement: 92 cu. in. / 1.5 L Gross power rating @ 2800 rpm: 32.7 hp / 25.1 kW Emission controls: Meets all US EPA Tier 4 final standards Undercarriage: Track type: General purpose track costructed of rubber compound with embedded co-polymer cords and all-purpose treads. A smooth-tread "Turf Track" is optionally available. A single row of rubber track lugs is molded into the track. Track width: 11 in. / 279 mm Length of track on ground: 55 in. / 1397 mm Ground contact area: 1183 sq. in. / .79 sq. m. Drive system: Two hydrostatic direct-drive sprockets conrolled by a single joystick. Track drive sprockets: Elevated, with low-friction, replaceable sprocket rollers. Undercarriage suspension: Two independent torsion axles per undercarriage (side). Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels have sealed roller bearings. Roller wheel diameter: 10 in. / 254 mm Aux. Hydraulics: Pump capacity: 10 gpm / 37.9 lpm System pressure, max.: 3,000 psi / 20684 kPa Controls: Intermittent via button on loader control joystick or continuous via dash-mounted switch. Couplers: Push-to-connect quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block. Cooling system: High-efficiency hydraulic oil cooler beside (not stacked) engine radiator. Electrical: Nominal charge: 12 V Battery: 630 CCA Charging system: 65-amp alternator Convenience outlet: One 12-VDC port inside operator station Wiring: Pre-wired for all facrtory-available accessories Operator Station: Seat: Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2-inch (51 mm) wide seat belt. An adjustable suspension seat is optional. Loader controls: Right-hand pilot operated hydraulic joystick controls loader lift, lower and tilt. Joystick also has intermittent control button for auxiliary hydraulics. Drive control: Left-hand pilot-operated hydraulic joystick controls machine speed and direction. Engine speed: Hand-operated throttle lever. Indicators & gauges: Engine oil low-pressure light; Hydraulic oil high-temp light; Engine high-temp light; Low battery voltage light; Hourmeter; Fuel gauge. ROPS: Meets SAE J1040 MAY 94 and ISO 3471. FOPS: Meets SAE J1043 SEPT87 and ISO 3449. Illumination: Four fixed forward-facing halogen lights; one adjustable rear-facing halogen light; one interior light. Audible alarms: Horn and back-up alarm are standard. Refill Cap. Fuel tank: 10 gal / 37.9 L Hydraulic tank: 8 gal / 30.3 L Engine coolant / antifreeze: 1.5 gal / 5.6 L Engine oil, including filter: 6.3 quarts / 6 L Attachments(Not Included): The following attachemnts are available as options: Auger drive and bits Backhoe Broom, rotary Bucket, GP Bucket, light-material Bucket, multi-purpose Brush cutter, rotary Dozer blade Eliminator rake Grapple bucket Pallet forks Power box rake Snow blade Snow blower Stump grinder Trencher Vibratory roller ID:
Tag #: 18AS005

VIN #: ASVRT030JJDS08021

2018 unit with Cold Weather Cab CWC Operating Specs: Operating weight: 3,600 lb / 1633 kg Ground pressure @ operating weight: 3.0 psi / 20.7 kPa Rated operating capacity (35% tipping load): 665 lbs / 302 kg Tipping load: 1,900 lb / 862 kg Travel speed, max.: 5.3 mph / 8.5 kph Engine: Type: Diesel, 3-cylinder, naturally-aspirated Model: Perkins 403D-15 Displacement: 92 cu. in. / 1.5 L Gross power rating @ 2800 rpm: 32.7 hp / 25.1 kW Emission controls: Meets all US EPA Tier 4 final standards Undercarriage: Track type: General purpose track costructed of rubber compound with embedded co-polymer cords and all-purpose treads. A smooth-tread "Turf Track" is optionally available. A single row of rubber track lugs is molded into the track. Track width: 11 in. / 279 mm Length of track on ground: 55 in. / 1397 mm Ground contact area: 1183 sq. in. / .79 sq. m. Drive system: Two hydrostatic direct-drive sprockets conrolled by a single joystick. Track drive sprockets: Elevated, with low-friction, replaceable sprocket rollers. Undercarriage suspension: Two independent torsion axles per undercarriage (side). Roller wheels: 12 high-density polyurethane and rubber wheels per track. Wheels have sealed roller bearings. Roller wheel diameter: 10 in. / 254 mm Aux. Hydraulics: Pump capacity: 10 gpm / 37.9 lpm System pressure, max.: 3,000 psi / 20684 kPa Controls: Intermittent via button on loader control joystick or continuous via dash-mounted switch. Couplers: Push-to-connect quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block. Cooling system: High-efficiency hydraulic oil cooler beside (not stacked) engine radiator. Electrical: Nominal charge: 12 V Battery: 630 CCA Charging system: 65-amp alternator Convenience outlet: One 12-VDC port inside operator station Wiring: Pre-wired for all facrtory-available accessories Operator Station: Seat: Adjustable contour vinyl seat with built-in operator presence switch, lap bar and 2-inch (51 mm) wide seat belt. An adjustable suspension seat is optional. Loader controls: Right-hand pilot operated hydraulic joystick controls loader lift, lower and tilt. Joystick also has intermittent control button for auxiliary hydraulics. Drive control: Left-hand pilot-operated hydraulic joystick controls machine speed and direction. Engine speed: Hand-operated throttle lever. Indicators & gauges: Engine oil low-pressure light; Hydraulic oil high-temp light; Engine high-temp light; Low battery voltage light; Hourmeter; Fuel gauge. ROPS: Meets SAE J1040 MAY 94 and ISO 3471. FOPS: Meets SAE J1043 SEPT87 and ISO 3449. Illumination: Four fixed forward-facing halogen lights; one adjustable rear-facing halogen light; one interior light. Audible alarms: Horn and back-up alarm are standard. Refill Cap. Fuel tank: 10 gal / 37.9 L Hydraulic tank: 8 gal / 30.3 L Engine coolant / antifreeze: 1.5 gal / 5.6 L Engine oil, including filter: 6.3 quarts / 6 L Attachments(Not Included): The following attachemnts are available as options: Auger drive and bits Backhoe Broom, rotary Bucket, GP Bucket, light-material Bucket, multi-purpose Brush cutter, rotary Dozer blade Eliminator rake Grapple bucket Pallet forks Power box rake Snow blade Snow blower Stump grinder Trencher Vibratory roller ID:
$32000.00

2005 CAT 906 Equipment (Whole Vehicle)

Tag #: 5586
Hours : 10,968hrs Color: yellow
 
2005 Caterpillar 906 Wheel loader. PIN No. is CAT00906HMER00620. There are 10,968hrs. Caterpillar 3044C with 75HP. Hydrostatic transmission. Has new tires. Also has forks and bucket! Call with questions you may have! Call P&S Trucks and Parts - 1 (978) 582-9720
Tag #: 5586

VIN #: CAT00906HER00620

Hours : 10,968hrs

Color: yellow

2005 Caterpillar 906 Wheel loader. PIN No. is CAT00906HMER00620. There are 10,968hrs. Caterpillar 3044C with 75HP. Hydrostatic transmission. Has new tires. Also has forks and bucket! Call with questions you may have! Call P&S Trucks and Parts - 1 (978) 582-9720 See Video

$27500.00

1983 TAYLOR TYB180M Equipment (Whole Vehicle)

Tag #: P1011177
 
1983 TAYLOR TYB180M FORKLIFT LIFTING CAPACITY 18,000 LBS.
Tag #: P1011177

VIN #: P17066

1983 TAYLOR TYB180M FORKLIFT LIFTING CAPACITY 18,000 LBS.
$20900.00

1999 CAT TH83 Equipment (Whole Vehicle)

Tag #: 99RE223
 
NICE 8,000 LB LIFT THAT WILL GET YOU "UP" AND WORKING THIS SPRING. ID:
Tag #: 99RE223

VIN #: 3RN02011

NICE 8,000 LB LIFT THAT WILL GET YOU "UP" AND WORKING THIS SPRING. ID: Engine: Perkins 3.9L

HP: 106

Hours: 5787

Attachments: Bucket and Forks

Fuel Type: Diesel

Air Conditioning: No

Heat: No

Lift Capacity: 8000

Controls: Pilot

Rear Tires: 14.00 R24 35%

Front Tires: 14.00 R24 35%

Drive: All wheel

$16900.00

2018 SkidLift 2030E HD Equipment (Whole Vehicle)

Tag #: CT0904
 
Skid-Lift is a new product that has been developed and pairs the advantages of a scissor lift with the flexibility of a skid steer. It will easily fit on the front of a skid steer trailer for transportation along with the skid steer. The Skid-Lift has a quick attach plate on the end or as a side attachment option (see pictures below). The auxiliary hydraulic system on your skid steer provides the power for the lift and tilt. The base legs are adjustable for uneven or rough terrain. The unit will also work with many fork lifts that have external hydraulic hooks. Tractors can also be hooked up to the Skid-Lift with the use of the optional 3 point hitch adaptor plate. Model 2030E HD 20' Platform Height (25' Working Height), Includes 4 Degree Side Tilt feature, 6' x 30" Platform w/ 24" deck extension, End and Side Attach Plates included, Single End Access Doors. See the Skid-Lift in action: https://www.youtube.com/watch?v=_MPrAtz6NFc
Tag #: CT0904

Skid-Lift is a new product that has been developed and pairs the advantages of a scissor lift with the flexibility of a skid steer. It will easily fit on the front of a skid steer trailer for transportation along with the skid steer. The Skid-Lift has a quick attach plate on the end or as a side attachment option (see pictures below). The auxiliary hydraulic system on your skid steer provides the power for the lift and tilt. The base legs are adjustable for uneven or rough terrain. The unit will also work with many fork lifts that have external hydraulic hooks. Tractors can also be hooked up to the Skid-Lift with the use of the optional 3 point hitch adaptor plate. Model 2030E HD 20' Platform Height (25' Working Height), Includes 4 Degree Side Tilt feature, 6' x 30" Platform w/ 24" deck extension, End and Side Attach Plates included, Single End Access Doors. See the Skid-Lift in action: https://www.youtube.com/watch?v=_MPrAtz6NFc See Video

$14000.00

2002 Toyota 02-7FG35 Forklift Equipment (Whole Vehicle)

Tag #: 297
Type Of equip: Toyato Forklift  
Great working forklift. 7,000 lbs lift capacity. Installed all new bearings in differential. New alternator. New front tires. New fork tines. 3 stage mast with side shift. Tilt steering column
Tag #: 297

VIN #: 10080

Type Of equip: Toyato Forklift

Great working forklift. 7,000 lbs lift capacity. Installed all new bearings in differential. New alternator. New front tires. New fork tines. 3 stage mast with side shift. Tilt steering column
$0.01

2007 CAT DP40KL-2 Equipment (Whole Vehicle)

Tag #: 11847
Type Of equip: Diesel Forkilft (8,800 lbs capacity)  
Dismantled for parts. Good running 6 cylinder diesel S6S Mitsubishi engine, (Test ran March-2016). Good trans/diff assembly. Mast is salvagable but will require some new hoses. Equipped with side shift forks. 60" tines
Tag #: 11847

VIN #: AT19C60238

Type Of equip: Diesel Forkilft (8,800 lbs capacity)

Dismantled for parts. Good running 6 cylinder diesel S6S Mitsubishi engine, (Test ran March-2016). Good trans/diff assembly. Mast is salvagable but will require some new hoses. Equipped with side shift forks. 60" tines
Please Call

2006 Crown SP3410-30 (Stand-on platform forklift) Equipment (Whole Vehicle)

Tag #: 17229
Type Of equip: Stand-on electric platform forklift  
Crown SP3400 stand-on electric platform forklift. 6,000# capacity. 3 stage mast. 20' lift height. Comes with charger. Please contact for details
Tag #: 17229

VIN #: 1A304119

Type Of equip: Stand-on electric platform forklift

Crown SP3400 stand-on electric platform forklift. 6,000# capacity. 3 stage mast. 20' lift height. Comes with charger. Please contact for details
Please Call

HYSTER H50XL Equipment (Whole Vehicle)

Tag #: 18538
Type Of equip: Forklift G/LP  
Tag #: 18538

VIN #: C177B1287N

Type Of equip: Forklift G/LP

   Looking for cores? Click here for core and unpriced items.

Your search has 12 matches. Now showing results 1 through 12.
Did you have trouble finding what you were looking for? Click here to request a part.


  Construction Equipment 



Berryhill Auctioneers




American Truck Chrome




VanderHaags