SEARCH - Equipment (Mounted)

15.5' X 96" STEEL, DUMP BODY, W/ 60" SIDES, AND FUNCTIONING, 2000LB, 72" X 96" ALUMINUM DECK, LIFTGATE, SOME RUST, IMPACT TO LOWER EDGE OF LIFTGATESee Video

CRAIG 2.5 yard x 74" Q/A ditching bucket. Built to fit Volvo EC290-CL or Cat 330 excavator. Comes with quick coupler. Good condition. Please contact for details

LOADER BUCKET, 1.3 CUBIC YARD CAPACITY, 90" WIDTH 37" HEIGHT ID: AT308080

CASCADE PAPER CLAMP WITH ROTATOR Attatchment Number: 45F-RCP-058 Catalog Number: 45F-RCP R-O Serial Number: 702805-S0-1 Fully Operational - No Leaks. Very Little Use. Removed from our Hyster S65XM. Call 1-800-247-4313 for information.

26' x 96" ,TODCO VAN BODY, 95" INSIDE WIDTH, 91" WIDE x 75" TALL DOOR, WOOD FLOORING, TRANSLUCENT ROOF, RUST ON BOTTOM OF DOOR, DENT IN FRONT LEFT CORNER POST, DOES NOT INCLUDE LIFTGATE ID: 1686761-015-04M

Good working condition. 3,000 lbs capacity @ center. 84" wide. (950 lbs installed weight). Complete take-off unit with electric/hydraulic pump & controls

DAKOTA BODIE UTILITY BODY, DOES NOT INCLUDE LIFTGATE & TOOL BOXES, 29 FOOT LONG, 101 INCHES WIDE ID: DB08875

17' X 96", STEEL DUMP BODY, W/ 48" SIDES, ROLL TARP AND WOOD SIDE RISERS NEED REPLACED, SHOWS RUST ID: 84101010

STEEL, SCRANTON, PACKER BODY, 14' TO FRONT OF GATE, 20.5' TO TAIL OF GATE. OPERATIONAL STATUS UNKNOWN, SHOWS MINOR RUST, BOTH REAR STEPS ARE BENT ID: 1869-8-96

PALFINGER ILP-33 LIFT GATE 3,300LBS CAPACITY 60" PLATFORM LENGTH 80" WIDTH BED HEIGHT RANGE 38" - 55"

MAXON column-lift hydraulic tailgate assembly. (Van trailer application). Complete take-off assembly with controls. 6000 lbs capacity. Deep cycle batteries. Please contact for details

'2016 Terex Hi-ranger LT40 manlift boom. (Damaged from upset. Selling for parts only). 40' reach. Outriggers. Possible hidden or un-detected damage. Selling as is. (Body and wetline system sold separately). Please contact for details

24 foot refrigerated box with lift gate. Please see pictures. We have many other boxes/truck bodies available. Thank you.

24' X 96" VANBODY, ROLL UP DOOR, 94" INSIDE HEIGHT, WOOD FLOOR, TRANSLUCENT ROOF W/UNTESTED 11X94 LIFTGATE , VANBODY HAS A SIDE BARN DOOR, ROLL UP DOOR IS CRACKED ON THE BACK, WOOD RAILING ON INSIDE IS BROKEN IN SOME AREAS, LIFTGATE DECK IS BENT, BARN DOOR BOTTOM IS PULLED AWAY SLIGHTLY

GOOD CONDITION PALFINGER LIFT GATE HYDRAULIC 2500 LB CAPACITY ALUMINUM MFG. DATE 10/17

16' X 95" SUPREME VANBODY, 83" INSIDE HEIGHT, 94" INSIDE WIDTH, 85" X 77" ROLL UP DOOR, WOOD FLOORS, TRANSLUCENT ROOF, DOOR NEEDS REPAIRED SPRING WON'T ALLOW TO GO UP AND DOWN.

24'4" x 98" INSIDE 90"W x 98"H, DOOR 85"W x 88"H, WOOD FLOOR, ALUMINUM ROOF, 17" CROSSMEMBER SPACING, FRONT TOP CORNER HAS PIECE BENT UP, TOP OF DOOR OPENING BENT OUT IN MIDDLE, TAILGATE IS RUSTY AND BENT IN SOME AREAS

89 INCH WIDE, 2 YARD BUCKET WITH CUTTING EDGE ID: 9R-5989

VACTOR 2100 PLUS, MODEL # 2110-J6-PLUS UNIT ONLY AS IS, WITH TANKS AND TOOL BOX, MISSING MULTIPLE HOSES RIGHT SIDE OF MAIN TANK IS SCRATCHED AND SCUFFED, WITH FRONT REEL, FRONT REEL MISSING THE FRONT PANEL, SIDE CONTROLS DISCONNECTED SITTING ON TOP OF FRAME ID: 2110-J6-PLUS

60" PLATFORM 3000 LB MAXXON GPT ALUMINUM LIFT GATE FRAME WIDTH 34" INSIDE TO INSIDE 35.25" OUTSIDE TO OUTSIDE OVERALL WIDTH OF LIFTGATE IS 89" TO WIDEST POINT HOIST/PISTON ON BOTH SIDES OF LIFTGATE

14' 7" x 96" DELTA VANBODY, 86" INSIDE HEIGHT, W/ ROLL UP DOOR, WOOD FLOOR, SOME DENTS ON R.H. UPPER SIDE PANEL, DOES NOT INCLUDE LIFT GATE

26' X 102" REEFER BODY, W/ THERMO KING REEFER UNIT, 78.5" X 87.5" REAR ROLL UP DOOR, 36" X 72.5" CURBSIDE DOORS, ALUMINUM FLOOR, INSULATED WALLS AND CEILING, CORROSION AND CRACKING ON RH SIDE BY BACK DOOR, RH REAR DOOR RAIL NEEDS REPLACED

24'5"L x 96"W INSIDE 95"W 88"W x 89.5"H DOOR, WOOD FLOOR, ALUMINUM ROOF, BOTH SIDE DOORS DELAMINATED & OXIDIZED, LEFT SIDE DOOR HAS HOLE ON BOTTOM EDGE, 48" SCRATCH & 35" SCRAPE ON RIGHT SIDE, WAS USED FOR INSULATION INSTALL SO IT HAS SEVERAL HOLES CUT IN BODY FOR HOSES & EQUIPMENT, 3 SMALL HOLES DRILLED IN FLOOR, BACK BUMPER IS BENT, REPAIR TO ALUMINUM SKIN ON RIGHT SIDE COVERING 2 PREVIOUSLY CUT LARGE HOLES, TAILGATE BENT

LOADER CRANE TRUCK ATTACHMENT: PALLET LIFT ARM

31'8" X 96", 91.5" WIDE INSIDE, 101.5" TALL INSIDE, DOORWAY- 93" WIDE x 109.5" TALL, CRACKED ALONG FRONT LH CORNER, BOTH BOTTOM SKIRTS BENT, ALL DOOR HINGES CRACKING, ALUMINUM ALONG BACK DOORS COMING OFF, BENT ON BOTH SIDES OF ROOF, MULTIPLE INTERIOR PANELS BROKE, HOLE IN RH WALL