SEARCH - Hood - Page 1 - HIGH MOUNTAIN HORSEPOWER

Complete hood assembly pulled from a 2020 Kenworth T880 long hood set back front axle model run for just 174k miles, non-wrecked. OEM P/N L29-6208-1110100 . Hood measures 53" from back of cowl to grab handle, listed through PACCAR as 122.6" BBC . Hood includes components pictured (lights, grille, emblems, etc.)

Short hood assembly pulled from a 2016 Peterbilt 389, non-wrecked. Hood measures 58.5" from back of hood to beginning of grill crown. Has minor chip repair at cowl area. In otherwise good used condition with no cracks/breaks on exterior or inner structure. Includes components pictured, hood comes fully dressed LESS LIGHTS - Lights have been pulled since pictures were taken - Headlights not included. OEM P/N per dealer L29-6110-1000

Hood assembly pulled from a 2013 Kenworth T800 curved glass application. OEM P/N L29-1177-1210000. Hood is in runnable condition, could use some repair to interior - see pictures. Has general wear marks from opening/closing, crack at inner saddle support, and will need repair where tension line mounts up for opening. Small dent in lower passenger side grille that shouldn't affect function.

Complete hood assembly pulled from a 2005 Peterbilt 387. Hood is in runnable as-is condition, could use repair at passenger side fender end. Has had minor repair done at passenger side fender as pictured. Wear marks from use on inside of hood - see pictures. Includes grill, mirror, emblem, and torsion bar. OEM P/N 13-04778 / 13-04777

Long hood pulled from a 2020 Kenworth T680 run for only 150K miles, non-wrecked. Hood is in great used condition, see pictures. OEM P/N L29-1293-10000

Jones Performance aftermarket hood for 1987-early 2007 Kenworth T800 Aero short hood 112" BBC. Center length 53.25". Replaces OE # K146-1328 , K146-1329 , L29-1008 , L29-1009 , L29-1033 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit -Headlamp and breather areas are cutout -Reinforced hinge area is pre-drilled -Includes cable catches and insulation stays Price includes shipping to High Mountain Horsepower at 99216 zip code

2007 Peterbilt 387 hood in good condition with the exception of a crack on the right hand side under the headlight (see pictures). Grill has been removed and is not included.

Jones Performance aftermarket hood for Ford F650 , F750 , F850 year models 2016 and newer. Center length 40.75", 39" from back of hood to grill opening. Replaces OE # FC4Z-16612-A , NC4Z-16612A -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit Warnings: -Will fit both diesel and gas motor trucks Price includes shipping to High Mountain Horsepower at 99216 zip code

Jones Performance aftermarket hood for Freightliner FL50 , FL60 , FL70 , and FL80 series medium-duty business class trucks. Center length 46.5" . Replaces OE # A17-14774-004 , A17-14024-004 , A17-15053-000 , 680-880-1957 , 680-880-2057 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -Double wall construction on lower grill area -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit -Includes front hinges for mounting -Includes insulation stays and wire harness mounts -DOES NOT include hinge bar Warnings: -Difference between truck hood and school bus hood is location of turn signals and hinges -Does not fit FL106 model Price includes shipping to High Mountain Horsepower at 99216 zip code

Jones Performance aftermarket hood JP-P04 - fits Peterbilt 379 extended hood (127" BBC) - CENTER SECTION ONLY. Fiberglass replacement for OEM aluminum hood. Center length back to grill 68". Replaces OE # 13-03553 & L29-6062 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit -Grill area is one-piece and fully enclosed for extra support -Specially designed hinge area with additional reinforcement -Center section is a one-piece design with body line and no rivets Price includes shipping to High Mountain Horsepower at 99216 zip code

Freightliner Cascadia hood assembly pulled from a 2016 model. Hood has some wear marks on hood interior from use as well as a crack beginning on driver side inner structure (see pictures). May have some minor delamination on inner passenger side near grille area. Scratches on exterior left hand side should be buffable. Great candidate for repair.

Left side fender liner pulled from a 2017 Kenworth T680 long hood. Liner is in good used condition, see pictures. OEM P/N L52-6028 REV A

2017 Kenworth T800 high hood with two piece grill - partially mounted on radiator. Hood measures 60" from back of hood to grab handle. Truck was only run for 191,003 miles, non-wrecked. Hood is in overall good condition but has minor starburst/beginning of a crack at two high stress spots near front right and front left truck numbers, should be easy repair. OEM P/N L29-1062-7110010 1XKDDK9X3HR153176

Jones Performance aftermarket hood JP-K17 - fits Kenworth W900L AeroCab (curved windshield) Metton style 2002 and newer. Fiberglass replacement for metton hood. Center length from back to grill is 66". Comes with a two year warranty against manufacturing defects or inner structure failure. Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # L29-1003, L29-1017, L29-1018, L29-1113, L29-1126, & L29-1130 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -7" side of fender drop -White sandable gel coat finish -Headlight area and breather area cut out -Reinforced hinge areas and inner fender mounting holes pre-drilled -Includes cable catches and insulation stays -Hap 2001 Certified to fit

Jones Performance aftermarket hood JP-K04 - fits 1986 and newer T800A with straight cowl and split flat windshield. Fiberglass replacement for OEM hood. Takes quad headlight buckets. Center length from back to grill 64". Comes with a two year warranty against manufacturing defects or inner structure failure. Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # K146-1031 & K146-1052 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -Reinforced hinge area is pre-drilled -White sandable gel coat finish -Includes cable catches and insulation stays -Headlights and breather are already cut out -Hap 2001 Certified to fit

Jones Performance aftermarket fiberglass hood JP-K03 - fits 1967-1982 Kenworth W900A. Center length back to grill 63". Replaces OE # 1K146-6234 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Reinforced hinge assembly -White sandable gel coat finish -Holes pre-drilled for mounting and accessories -Includes cable catches -Includes insulation stays -Scribe lines provided for headlight and breather cut outs – check old hood for cut out verification -Hap 2001 Certified to fit

Jones Performance aftermarket hood JP-K11 - fits Kenworth T800 with split fender curved cowl 1995 to 2006. For Aerocab curved windshield style truck. Center length from back to grill is 60". Comes with a two year warranty against manufacturing defects or inner structure failure. Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # K146-1306 & K146-1307 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -Reinforced hinge area is pre-drilled -White sandable gel coat finish -Includes cable catches and insulation stays -Dealer must cut out for left, right or dual external air cleaner application -Hap 2001 Certified to fit

Jones Performance aftermarket hood JP-P05 - fits Peterbilt 357 & 378 with set-forward axle (119" BBC) with replaceable fenders and liners. Fiberglass replacement for OEM hood. Center length back to grill 55". Comes with a two year limited warranty against manufacturing defects or inner structure failure. Price includes shipping to High Mountain Horsepower at 99216 zip code Replaces OE # 13-04820-A401, 13-03520, 13-03732, 13-04206, 13-04207, 13-04516-A401, 13-04562-A101, 13-04674-A101, 13-04674-A401, 13-04690, 13-04821, 13-04823, & 13-04820A101 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit -Built in hinge gussets and fender liners -Newly designed center section built with added strength allowing fenders to break away if damaged, under most circumstances -Specially designed hinge area with additional reinforcement -Reinforced grill area for added strength -Easily customized to a truk-rodz hood

Jones Performance aftermarket hood JP-K33 - fits Kenworth T800 split fender AeroCab Metton style. Fiberglass replacement for OEM hood. Center length back to grill 61.5". Comes with a two year limited warranty against manufacturing defects or inner structure failure. Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # L29-1177-2110000, L29-1177-2110010, L29-1177-2210000, L29-1177-2220000, L29-1177-2510000, L29-1177-2510010, L29-1177-2520000 L29-1177-2420000 with modification L29-1102-2510000, L29-1102-2520000 with wheel openings trimmed for flotation tires -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Reinforced hinge assemblies are pre-drilled -Headlight areas are cut out for rectangular headlights -Includes cable catches and insulation stays -Hap 2001 Certified to fit

Jones Performance aftermarket fiberglass hood JP-K06 - fits 1988 and newer Kenworth W900B with straight cowl. Center length back to grill 61.25". Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # K146-1092, K146-1254, L29-1006 WILL FIT 1982 TO 1987 WITH HEADLIGHT & BEZEL UPDATE for K146-1097, and K146-9571 -Aftermarket, fits 1987 and newer Kenworth W900B hood with straight cowl -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -Has beveled headlight area -Comes with headlights cut out -White sandable gel coat finish -Includes cable catches and insulation stays -Reinforced hinge area is pre-drilled -Breather cutout approx 12? deep -Hap 2001 Certified to fit

Right side fender liner pulled from a 2019 Peterbilt 579 run only 75,995 miles. Liner is in good used condition, see pictures. Part has multiple part numbers OEM P/N L52-6030 REV D , L52-6028R REV A , L52-6025

Left side fender liner pulled from a 2019 Peterbilt 579 run only 75,995 miles. Liner is in good used condition, see pictures. Part has multiple part numbers OEM P/N L35-1056 , L52-6028 REV A , L52-6025 REV A

Jones Performance aftermarket hood JP-K15 - fits Kenworth W900 L straight cowl flat windshield style. Non-aero (127" BBC) style. Center length from back to grill is 70.75". Comes with a two year warranty against manufacturing defects or inner structure failure. Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # K146-1135, K146-1138, & L29-1007 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -White sandable gel coat finish -Headlight area and breather area cut out -Holes pre-drilled for mounting and accessories -Reinforced hinge area is pre-drilled -Inner fender mounting holes are pre-drilled -Includes cable catches and insulation stays -Hap 2001 Certified to fit

Jones Performance aftermarket hood JP-K09 - fits 1995 to 2006 Kenworth T800 hood with aero cowl. Fiberglass replacement for OEM hood. Center length back to grill 60". Comes with a two year limited warranty against manufacturing defects or inner structure failure. Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # K146-1293, K146-1311, & K146-1312 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Reinforced in high stress areas – hinge areas are pre-drilled -Headlight and air intake areas are cut out and pre-drilled -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Includes catch cables and insulation stays -Hap 2001 Certified to fit

Jones Performance aftermarket hood JP-P04 - fits Peterbilt 379 extended hood (127" BBC) with replaceable fenders and liners. Fiberglass replacement for OEM aluminum hood. Center length back to grill 68". Replaces OE # 13-03553 & L29-6062 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit -Grill area is one-piece and fully enclosed for extra support -Bolt-on fenders with liners, stainless steel bolts and Nylock nuts -Specially designed hinge area with additional reinforcement -Center section is a one-piece design with body line and no rivets Price includes shipping to High Mountain Horsepower at 99216 zip code