SEARCH - Hood - HIGH MOUNTAIN HORSEPOWER

Short hood takeoff. Grill has small scrapes and dings. Grille held in at bottom with screws and separating from passenger side at bottom. Missing drivers side panel under headlamp. Fully loaded hood, includes lights, grille, hinges and mirror. Measures 48 1/4 from cowl to back of handle at centerline

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Hood assembly pulled from a next gen Kenworth T680 long hood model run for 24k miles, non-wrecked. Hood is in very good used condition, has some very minor signs of wear on the interior as pictured. Rust beginning at hood hinge bar (see pictures). Color code is midnight blue. OEM P/N per dealer L29-1304-2000000

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Complete hood. Takeoff from low mileage non wrecked truck. 47.5 inch length at center, from cowl to rear of grille at handle. Small scratches near rt headlamp, rub marks on lower grille and left headlamp. All from the tow company light bar.

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Long hood from a 2024 Peterbilt 579. No miles have been put on this truck. Comes complete. Great condition, couldn't get a better hood unless you bought it from the dealer. Measures 55' from top of hood to start of grill. Check with dealer prior to purchase using VIN (1XPBD49X1RD893725) or P/N OEM# L29-6244-13010, L29-6244-20010 S/N: 893725

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Takeoff from low mileage non wrecked truck. Complete hood with hinge, less side vent screens. OEM # L29-6237-13000 REV B. You will not find a nicer hood without buying new from a dealer.

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

T680 Long Hood, takeoff from low mileage non wrecked truck. complete hood including headlamps struts and hinge. Some scratches (see picture) One mirror has crack (see picture).

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Complete 579 short hood with hinge. Takeoff from low mileage non wrecked truck. You will not find a nicer OEM hood without buying new from a dealer.

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Long hood pulled from a 2020 Kenworth T680 run for only 150K miles, non-wrecked. Hood is in great used condition, see pictures. OEM P/N L29-1293-10000

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Complete hood assembly pulled from a 2005 Peterbilt 387. Hood is in runnable as-is condition, could use repair at passenger side fender end. Has had minor repair done at passenger side fender as pictured. Wear marks from use on inside of hood. A few bubbles on the chrome grill - see pictures. Includes grill, mirror, emblem, and torsion bar. OEM P/N 13-04778 / 13-04777

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

2007 Peterbilt 387 hood in good condition with the exception of a crack on the right hand side under the headlight (see pictures). Grill has been removed and is not included.

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

2017 Kenworth T800 high hood with two piece grill - partially mounted on radiator. Hood measures 60" from back of hood to grab handle. Truck was only run for 191,003 miles, non-wrecked. Hood is in overall good condition but has minor starburst/beginning of a crack at two high stress spots near front right and front left truck numbers, should be easy to repair. OEM P/N L29-1062-7110010 1XKDDK9X3HR153176

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Peterbilt 579 hood. Short hood 47" from cowl to back of grille handle. Complete hood takeoff from a non-wrecked, low mile truck. Bug screen will have screw holes from retention to the shipping pallet. OEM# 0005791

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Takeoff from a low mileage (1145 miles) non wrecked truck. 55 3/8 " measurement at center from cowl to rear of grille. Complete hood.

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

SHORT HOOD 2023 Kenworth T880 hood, takeoff from low mile (4.7 mile) non-wrecked truck. One of the weather front snaps bent on the pallet.

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

49.5 length at centerline, cowl to rear of grille handle. scrape down drivers fender. L29-1294-1000. Complete hood.

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Jones Performance aftermarket hood JP-K33 - fits Kenworth T800 split fender AeroCab Metton style. Fiberglass replacement for OEM hood. Center length back to grill 61.5". Comes with a two year limited warranty against manufacturing defects or inner structure failure. Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # L29-1177-2110000, L29-1177-2110010, L29-1177-2210000, L29-1177-2220000, L29-1177-2510000, L29-1177-2510010, L29-1177-2520000 L29-1177-2420000 with modification L29-1102-2510000, L29-1102-2520000 with wheel openings trimmed for flotation tires -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Reinforced hinge assemblies are pre-drilled -Headlight areas are cut out for rectangular headlights -Includes cable catches and insulation stays -Hap 2001 Certified to fit

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Jones Performance aftermarket hood for 1987-early 2007 Kenworth T800 Aero short hood 112" BBC. Center length 53.25". Replaces OE # K146-1328 , K146-1329 , L29-1008 , L29-1009 , L29-1033 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit -Headlamp and breather areas are cutout -Reinforced hinge area is pre-drilled -Includes cable catches and insulation stays MADE IN AMERICA! Price includes shipping to High Mountain Horsepower at 99216 zip code

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Jones Performance aftermarket hood JP-V11 - fits Volvo VNL 2004 to 2018 Gen 2 trucks. Fiberglass replacement for OEM hood (check for flotation tires). Center length back to grill 56". Fits long hood trucks only with set back axle. Replaces OE # 20534773, 20748255, 20817471, 21113794, 21113797, 82718447, 82718448 -One-piece design replaces OE three-piece hood -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit MADE IN AMERICA! Price includes shipping to High Mountain Horsepower in 99216 zip code.

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Jones Performance aftermarket hood JP-K11 - fits Kenworth T800 with split fender curved cowl 1995 to 2006. For Aerocab curved windshield style truck. Center length from back to grill is 60". Comes with a two year warranty against manufacturing defects or inner structure failure. must cut out for left, right or dual external air cleaner application Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # K146-1306 & K146-1307 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -Reinforced hinge area is pre-drilled -White sandable gel coat finish -Includes cable catches and insulation stays -Dealer must cut out for left, right or dual external air cleaner application -Hap 2001 Certified to fit

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Jones Performance aftermarket hood JP-FL03E - fits Freightliner FLD120 SBA trucks 1988 & newer. Fiberglass replacement for OEM hood. Center length back to grill 61". -One-piece design -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit -Economy hood does not have 90 degree lip edges around wheel opening and bottom of hood, and spot laminated only in stress areas Price includes shipping to High Mountain Horsepower at 99216 zip code

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Jones Performance aftermarket hood JP-K12ID - fits Kenworth T600 1997 and newer AeroCab trucks with split grill and curved windshield. Center length back to grill 59". Comes with a two year limited warranty against manufacturing defects or inner structure failure. Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # K146-1231 -1 piece hood replaces OEM 3 piece hood -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Double wall construction provided in grill area -White sandable gel coat finish -Holes pre-drilled for mounting and accessories -Includes cable catches, insulation stays, grill mount screws, and wire harness clips -Includes pre-mounted hinge assemblies -Includes molded inner fender splash shield assemblies -Hap 2001 Certified to fit MADE IN AMERICA!

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Jones Performance aftermarket hood JP-P04 - fits Peterbilt 379 extended hood (127" BBC) with replaceable fenders and liners. Fiberglass replacement for OEM aluminum hood. Center length back to grill 68". Replaces OE # 13-03553 & L29-6062 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit -Grill area is one-piece and fully enclosed for extra support -Bolt-on fenders with liners, stainless steel bolts and Nylock nuts -Specially designed hinge area with additional reinforcement -Center section is a one-piece design with body line and no rivets MADE IN AMERICA! Price includes shipping to High Mountain Horsepower at 99216 zip code

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Jones Performance aftermarket fiberglass hood JP-K06 - fits 1987 and newer Kenworth W900B with straight cowl. Center length back to grill 61.25". Price includes shipping to High Mountain Horsepower at 99216 zip code. Replaces OE # K146-1092, K146-1254, L29-1006 WILL FIT 1982 TO 1987 WITH HEADLIGHT & BEZEL UPDATE for K146-1097 and K146-9571 -Aftermarket, fits 1987 and newer Kenworth W900B hood with straight cowl -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -Has beveled headlight area -Comes with headlights cut out -White sandable gel coat finish -Includes cable catches and insulation stays -Reinforced hinge area is pre-drilled -Breather cutout approx 12? deep -Hap 2001 Certified to fit

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Jones Performance aftermarket hood JP-K04 - fits 1986 and newer T800A with straight cowl and split flat windshield. Fiberglass replacement for OEM hood. Takes quad headlight buckets. Center length from back to grill 64". Comes with a two year warranty against manufacturing defects or inner structure failure. Replaces OE # K146-1031 & K146-1052 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -Reinforced hinge area is pre-drilled -White sandable gel coat finish -Includes cable catches and insulation stays -Headlights and breather are already cut out -Hap 2001 Certified to fit MADE IN AMERICA! Price includes shipping to High Mountain Horsepower at 99216 zip code.

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA

Jones Performance aftermarket hood JP-P06 - fits Peterbilt 379 short hood 119" BBC with replaceable fenders and liners. Fiberglass replacement for OEM hood. Center length back to grill 55". Comes with a two year limited warranty against manufacturing defects or inner structure failure. Price includes shipping to High Mountain Horsepower at 99216 zip code Replaces OE #13-03552, L29-6061 -Cofab reinforcement used in high stress areas -Coremat added to suppress starbursts in high stress areas -E-coated or galvanized steel hardware used to resist corrosion -Holes pre-drilled for mounting and accessories -White sandable gel coat finish -Hap 2001 Certified to fit -Built in hinge gussets and fender liners MADE IN AMERICA!

Sold by: High Mountain HorsepowerLocation: SPOKANE VALLEY WA