SEARCH - Equipment (Mounted)

USED 14'3" X 96" X 70" FRAME CUTOFF W/ 15 COMPARTMENTS, 4 WHEEL CHOCK CUBBIES, HOSE REEL, OUTRIGGER, POWER INVERTER AND 2 OUTLETS; BUCKET AND BOOM TORN AND BUCKLED AT PIVOT POINT ID:

USED SOLD FOR PARTS OR REPAIR ONLY, 14' X 96" FIBERGLASS UTILITY BODY, W/ VERSALIFT TEL 29NE BUCKET LIFT, LEFT SIDE ROLL OVER, BOOM IS BENT, TURNTABLE SWINGS FREELY

USED 89 INCH WIDE, 2 YARD BUCKET WITH CUTTING EDGE ID: 9R-5989

USED BUCKET WITH TEETH ONLY, BOTTOM HAS SOME DENTS AND ONE CRACK, AREA AROUND PIN HAS SOME DAMAGE, 45" WIDE, 50" HEIGHT, 57" DEPTH ID: AT451617

USED ALTEC AM60 BUCKET LIFT WITH MECHANICS BED

USED ASBURY MP BUCKET ASSEMBLY W/ CLAM AND CYLINDERS, MEASURES 36" TALL, 106" OUTSIDE, 32" DEEP FROM FRONT LIP TO INSIDE BACK, CLAM MEASURES 22" AT SEAM ID: 11032-28049

USED BUCKET W/ 6 TEETH ONLY, TEETH WORN, 59" WIDE 51" HEIGHT 55" DEPTH, DOES NOT INCLUDE THUMB OR LINKAGES ID: 61NA-30401GG

USED CASE 621/721BXT LOADER BUCKET ONLY. PART # 120438A1. 2.50 Y.D. SERIAL NUMBER 27593 35816 ID: L127460

USED LOADER BUCKET ASSEMBLY WITH CYLINDERS, 89" WIDE, 43" TALL, 32" DEEP ID: 216-8821

USED LOADER BUCKET ONLY, 80 INCHES WIDE, 40 INCHES HIGH, 29 INCHES DEEP, SOME SLIGHT BENDS ON SIDES, NORMAL WEAR AND TEAR ID: D64731

USED BUCKET ONLY, CUTTING EDGE IS WORN, 95" WIDTH, 40" HEIGHT, 40" DEPTH ID: 417-U77-AB40

USED CLAM BUCKET W/ CYLINDERS, P/N L103450 ID: L103450

USED BUCKET WITH TEETH, 40.25" WIDE, 53" TALL, 62" DEEP. SOME CRACKING ON RIGHT HAND SIDE WILL NEED WELDED

NEW TL210 110" WIDE 4.5 YRD BOLT ON CUTTING EDGE. ID: 18TL210B45LMPW1

USED 11' 8" X 92.25" UTILITYBODY W/ BOOM & BUCKET, SURFACE RUST, 2 SMALL RUST HOLES

USED 78" WIDE X 42" TALL X 24" DEEP W/ 8 REMOVABLE TEETH, SEVERAL PIN/ BUSHING AREAS SHOWING WEAR & MAY NEED SOME WORK ID: D49232

USED BUCKET W/ TEETH, SOME WEAR AT PIN AREA, MIS- MATCHED TEETH

USED BUCKET ONLY, 126" WIDE, 52" HEIGHT, 50" DEPTH, 6 YARD CAPACITY ID: AT346224

USED BUCKET ONLY, 116" WIDE 54" HEIGHT, 52" DEPTH ID: 292726A1

USED 115.5" WIDE, 57" HIGH, 42.5" DEEP, NUMEROUS WELDS THROUGHOUT CUTTING EDGE WELDED ON. CENTER OF CYLINDER TO CYLINDER IS 38" CENTER TO CENTER OF LOADER ARM IS 57" ID:

USED JRB BUCKET ONLY, 5.5 YARD CAPACITY, 120" WIDE, 54" HEIGHT, 51" DEPTH, HAS HAD PLATES WELDED TO THE SIDES ID: 90D1511

USED ALTEC TA41M BOOM WITH BUCKET, OPERATIONAL STATUS UNKNOWN

USED BUCKET, 48" TALL X 36" WIDE X 42" DEEP W/ 4 WELD ON TEETH, 3" PINS AT 20.5" CENTER TO CENTER, 12.75" INSIDE WIDTH AT BOTTOM PIN

USED LOADER BUCKET ONLY, HOLE IN L.H. SIDE AND SOME STEEL PEELING

USED BUCKET, 105" WIDE, 42" TALL, 32" DEEP ID: 401643R91