2016 KENWORTH T800 Complete Vehicle
Please Call
| Tag #: 1409 | |
| VIN #: 3BKDXP0X0GF115105 |
2016 Kenworth T800 complete vehicle for sale in great used condition, sitting at 655,680 miles. Formerly used as a tanker, the long frame on this truck could go toward a variety of uses or add a fifth wheel for standard hauling. Standard 248" wheelbase, cab to end-of-frame length is ~276". Set up with pintle hitch at rear from hauling doubles.
***New cylinder head and cylinder kit done 215k miles ago, verifiable through PACCAR*** This truck has a PACCAR MX13 (serial # Y087560) engine Eaton manual 13 speed. Truck has also recently had engine wiring harness done through dealer. 8 bag rear suspension with disc brakes, DSH40 housings with 3.21 ratio for the gears, 40k lb rating for rears. 13.2k Spicer steer w/ disc brakes. Watson and Chalin lift axle behind cab rated for 13,500lbs.
Clean title, single owner vehicle that has been well maintained. This truck is ready to be put in to service.
Also of note - Transmission is set up with 8 bolt PTO shaft drive
Tread depths are as follows - Steers 22/32nds, Lift 21/32, Front Drive 17/32, Rear Drive 25/32 respectively
VIN - 3BKDXP0X0GF115105
***New cylinder head and cylinder kit done 215k miles ago, verifiable through PACCAR*** This truck has a PACCAR MX13 (serial # Y087560) engine Eaton manual 13 speed. Truck has also recently had engine wiring harness done through dealer. 8 bag rear suspension with disc brakes, DSH40 housings with 3.21 ratio for the gears, 40k lb rating for rears. 13.2k Spicer steer w/ disc brakes. Watson and Chalin lift axle behind cab rated for 13,500lbs.
Clean title, single owner vehicle that has been well maintained. This truck is ready to be put in to service.
Also of note - Transmission is set up with 8 bolt PTO shaft drive
Tread depths are as follows - Steers 22/32nds, Lift 21/32, Front Drive 17/32, Rear Drive 25/32 respectively
VIN - 3BKDXP0X0GF115105
